User's Manual

Chapter 21 IP/MAC Binding
ISG50 User’s Guide
345
21.3 IP/MAC Binding Exempt List
Click Configuration > Network > IP/MAC Binding > Exempt List to open the IP/MAC
Binding Exempt List screen. Use this screen to configure ranges of IP addresses to which the
ISG50 does not apply IP/MAC binding.
Figure 229 Configuration > Network > IP/MAC Binding > Exempt List
The following table describes the labels in this screen.
Table 110 Configuration > Network > IP/MAC Binding > Exempt List
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Click an entry or select it and click Edit to modify the entry’s settings.
Remove To remove an entry, select it and click Remove. The ISG50 confirms you want to
remove it before doing so.
# This is the index number of the IP/MAC binding list entry.
Name Enter a name to help identify this entry.
Start IP Enter the first IP address in a range of IP addresses for which the ISG50 does not
apply IP/MAC binding.
End IP Enter the last IP address in a range of IP addresses for which the ISG50 does not
apply IP/MAC binding.
Apply Click Apply to save your changes back to the ISG50.