User's Manual

Chapter 21 IP/MAC Binding
ISG50 User’s Guide
344
21.2.2 Static DHCP Edit
Click Configuration > Network > IP/MAC Binding > Edit to open the IP/MAC Binding Edit
screen. Click the Add or Edit icon to open the following screen. Use this screen to configure an
interface’s IP to MAC address binding settings.
Figure 228 Configuration > Network > IP/MAC Binding > Edit > Add
The following table describes the labels in this screen.
OK Click OK to save your changes back to the ISG50.
Cancel Click Cancel to exit this screen without saving.
Table 108 Configuration > Network > IP/MAC Binding > Edit (continued)
LABEL DESCRIPTION
Table 109 Configuration > Network > IP/MAC Binding > Edit > Add
LABEL DESCRIPTION
Interface Name This field displays the name of the interface within the ISG50 and the interface’s
IP address and subnet mask.
IP Address Enter the IP address that the ISG50 is to assign to a device with the entry’s MAC
address.
MAC Address Enter the MAC address of the device to which the ISG50 assigns the entry’s IP
address.
Description Enter up to 64 printable ASCII characters to help identify the entry. For example,
you may want to list the computer’s owner.
OK Click OK to save your changes back to the ISG50.
Cancel Click Cancel to exit this screen without saving.