User's Manual

Chapter 3 Status Screens
AMG1202-T10A User’s Guide
34
Device Information
Host Name This field displays the ZyXEL Device system name. It is used for identification.
Model Number This is the model name of your device.
MAC Address This is the MAC (Media Access Control) or Ethernet address unique to your
ZyXEL Device.
ZyNOS
Firmware
Version
This is the current version of the firmware inside the device. Click this to go to
the screen where you can change it.
DSL Firmware
Version
This is the current version of the device’s DSL modem code.
WAN Information
DSL Mode This is the DSL standard that your ZyXEL Device is using.
Annex Type This is the ADSL annex type that your ZyXEL Device is using.
IP Address This is the current IP address of the ZyXEL Device in the WAN. Click this to go to
the screen where you can change it.
IP Subnet
Mask
This is the current subnet mask in the WAN.
Default
Gateway
This is the IP address of the default gateway, if applicable.
VPI/VCI This is the Virtual Path Identifier and Virtual Channel Identifier that you entered
in the wizard or WAN screen.
LAN Information
IP Address This is the current IP address of the ZyXEL Device in the LAN. Click this to go to
the screen where you can change it.
IP Subnet
Mask
This is the current subnet mask in the LAN.
DHCP This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses
to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
WLAN Information
ESSID This is the descriptive name used to identify the ZyXEL Device in a wireless LAN.
Click this to go to the screen where you can change it.
Channel This is the channel number used by the ZyXEL Device now.
Security This displays the type of security mode the ZyXEL Device is using in the wireless
LAN.
WPS This displays whether WPS is activated. Click this to go to the screen where you
can configure the settings.
Status This displays whether WLAN is activated.
Security
Firewall This displays whether or not the ZyXEL Device’s firewall is activated. Click this to
go to the screen where you can change it.
System Status
Table 4 Status Screen
LABEL DESCRIPTION