User's Manual

Chapter 2 The Web Configurator
AMG1202-T10A User’s Guide
30
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL Device features.
The following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
Status This screen shows the ZyXEL Device’s general device and network status
information. Use this screen to access the statistics and client list.
Network
WAN Internet Access
Setup
Use this screen to configure ISP parameters, WAN IP address
assignment, and other advanced properties.
More
Connections
Use this screen to configure additional WAN connections.
LAN IP Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
DHCP Setup Use this screen to configure LAN DHCP settings and DNS server.
Client List Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
IP Alias Use this screen to partition your LAN interface into subnets.
Wireless LAN AP Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the ZyXEL Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected Setup)
settings.
WPS Station Use this screen to set up a WPS wireless network.
WDS Use this screen to set up Wireless Distribution System links to other
access points.
Scheduling Use this screen to configure the dates/times to enable or disable the
wireless LAN.
NAT General Use this screen to enable NAT.
Port Forwarding
Use this screen to make your local servers visible to the outside world.
ALG Use this screen to enable or disable SIP ALG.
Security
Firewall Use this screen to activate/deactivate the firewall.
Filter URL Filter Use this screen to block access to certain URL web sites.
Application Filter Use this screen to allow or block traffic from certain applications.
IP/MAC Filter Use this screen to configure IP/MAC filtering rules for incoming or
outgoing traffic.
Advanced
Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
802.1Q/1P Group Setting Use this screen to activate 802.1Q/1P, specify the management VLAN
group, display the VLAN groups and configure the settings for each VLAN
group.
Port Setting Use this screen to configure the PVID and assign traffic priority for each
port.