User's Manual

Chapter 16 Remote Management
AMG1202-T10A User’s Guide
173
Use this screen to specify which interfaces allow FTP access and from which IP address the access
can come. To change your ZyXEL Device’s FTP settings, click Advanced > Remote MGMT > FTP.
The screen appears as shown.
Figure 91 Advanced > Remote MGMT > FTP
The following table describes the labels in this screen.
16.5 The SNMP Screen
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL Device
Table 65 Advanced > Remote MGMT > FTP
LABEL DESCRIPTION
Server Port You may change the server port number for a service, if needed. However, you
must use the same port number in order to use that service for remote
management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.