User's Manual

Chapter 16 Remote Management
AMG1202-T10A User’s Guide
171
16.2 The WWW Screen
Use this screen to specify how to connect to the ZyXEL Device from a web browser, such as Internet
Explorer.
Note: If you disable the WWW service in the Remote MGMT > WWW screen, then the
ZyXEL Device blocks all HTTP connection attempts.
16.2.1 Configuring the WWW Screen
Click Advanced > Remote MGMT to display the WWW screen.
Figure 89 Advanced > Remote MGMT > WWW
The following table describes the labels in this screen.
16.3 The Telnet Screen
You can use Telnet to access the ZyXEL Device’s command line interface. Specify which interfaces
allow Telnet access and from which IP address the access can come.
Table 63 Advanced > Remote Management > WWW
LABEL DESCRIPTION
Server Port You may change the server port number for a service, if needed. However, you
must use the same port number in order to use that service for remote
management.
Server Access Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the ZyXEL Device using this service.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.