Owner's manual

<7. HYDROGEN PURITY / PARAMETER SETTING>
7-5
IM 11T3E1-01E
Table 7.4 Setting Parameters at Service Level
Code
No.
Item Display
Data to be Set
(or Conditions)
Remarks
40 Indication of calibration coefcients
(read-only)
Zero
Span
*C_K_Z
*C_K_S
SX.XXXX
X.XXXX
See Figure 7.21 for key operation.
41 Indication of oscillation frequency
(read-only)
Frequency F2
Frequency F4
Frequency ratio
*F2.KHZ
*F4.KHZ
*F2/F4
X.XXXXX
X.XXXXX
X.XXXXX
See Figure 7.22 for key operation.
42 Indication of software version
(read-only)
*REV X.XX See Figure 7.23 for key operation.
43 Setting of high-resolution mode *S_CYC · Normal resolution : 0
· High-resolution : 1
See Figure 7.24 for key operation.
44 Setting of password *PASS 0.0.0 to 9.9.9 See Figure 7.25 for key operation.
45 Selecting Battery alarm detection *BAT · Non detection : 0
· Detection : 1
See Figure 7.26 for key operation.
50 Selecting the instruments *MODEL · Density meter : 0
· Calorie meter : 1
· Hydrogen purity, replacement
meter : 2
See Figure 7.27 for key operation.
82 Setting Detector Constant See Figure 7.28 for key operation.