Specification
6 7
PARTS DIAGRAM
MODEL: KMJ01-30"KMJ01-36"
Other accessories:
INSTALLATION REQUIREMENTS
WARNING
Sufficient air is needed for proper combustion and exhausting of gases through the chimney of fuel burning equipment to
prevent back- drafting. Follow the cooking equipment manufacturers guideline and safety standards such as those published
by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air Conditioning
Engineers (ASHRAE), and local code. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other
hidden utilities. Ducted systems must always be vented outdoors.
1.Please read the following instructions carefully.
2.This Range Hood can be vented through the top or back. Remove the Air Outlet Cap
according to the option chosen (Fig. 1). For ductless installation, install an Air Outlet
Cap on both the rear and top vent holes.
3.For optimal performance the Range Hood must be installed 24" - 36" in height from
the cooktop. (Fig. 2)
4.Electrical Requirements: Rated Voltage and Frequency:) 110-120V~ 60Hz. Motor Input
Power: 65W
1.
3-Speed Mechanical Control
2.
Main Body
3.
Motor Housing
4.
LED Lights (2 pcs)
5.
Aluminum Filter (2 pcs)
6.
Carbon Filter (2 pcs)
7.
Smoke tube (1 pcs)
8.
Duct Clamps (1 pcs)
9.
Duct Connection Fitting with Damper(1 pcs)
10.
Air Outlet Cap (2 pcs)
11.
Screws 5mm x 49mm (4 pcs)
12.
Wall Anchors 10mm x 43.3mm (4 pcs)
TOOLS NEEDED FOR INSTALLATION