User guide

Removing dirt/debris from TurboTool (some models only)
Removing debris from the brushbar
Using a pair of
scissors cut any hair
or debris free from
around the brushes.
Line up the tabs on front
of the housing and re-t.
Slide locking ring into
groove to secure.
Slide the locking ring
to remove.
Using a pair of scissors
remove any threads or
hair caught around the
brush bar.
Tabs
Lift and separate
the housing.
Taking care of your machine Let’s talk technical
IMPORTANT: Unplug and switch o vacuum cleaner before performing maintenance or troubleshooting checks.
TIP
To test for a blockage in the
hose, drop a small ball of
paper through the hose. The
paper will drop through if the
hose is clear.
Pull hose out of hose to
machine connector.
Wrap hose around hose guide. Over and behind carry handle.
Into hose to machine connector.
Attach accessory hose
to extension hose.
Storing extension hose on vacuum cleaner (optional)
U86-FN_Pe_FlairEasy-Store_UG_[J2543]_Amd_01.07.14.indd 12-13 01/07/2014 14:15