Final Artwork In Progress Not used Job No: J2543 Model No: Part No.: Project: Flair Easy-Store Pet Project: U86-IN-e_Series_UG Barcode No.: Upload date: Size (HxW): Model No: U86-FN-Pe C M Y Designer: ACW Colours used: Proof No: 2 K PM: 165C Size (HxW): Flair Easy-Store™ Let’s get started U86-FN-Pe U86-FN_Pe_FlairEasy-Store_UG_[J2543]_Amd_01.07.14.indd 1 vax.co.
Let’s talk safety Basic safety precautions This vacuum cleaner is intended for household use only and NOT for commercial or industrial use. capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum cleaner in a safe way and understand the hazards involved. Children shall not play with the vacuum cleaner. Cleaning and user maintenance shall not be made by children without supervision.
Thank you for buying this Flair Easy-Store™. Taking care of your carpets The Flair Easy-Store™ is designed to make washing carpets regularly, as effective and efficient as possible and this user guide will help you get the most out of your machine. Maintaining your carpets will ensure they keep their appearance for longer and smell fresh and clean. You’ve chosen carpets for your home for a reason and Vax will help you take good care of them.
Getting to know your machine Getting started PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE Before you begin cleaning Handle WARNING: Always switch off the vacuum cleaner before connecting or disconnecting the hose/attachments or removing and emptying the dirt container.
Using your machine Using your machine IMPORTANT: Always switch off and unplug the vacuum cleaner before connecting or disconnecting the hose/ attachments, or removing and emptying the dirt container. Using on the stairs The accessories can be attached to the extension tube or directly to the hose. When using accessories on the hose/extension tube raise the height adjuster to the highest setting. WARNING Plug vacuum cleaner into the mains, switch on.
Taking care of your machine Taking care of your machine IMPORTANT: The motor is equipped with a thermal cut-out. If for any reason the machine should overheat, the thermostat will automatically turn the machine off. Switch off and unplug the vacuum cleaner. Check the machine for blockages and clean the filters. Wash the filters with warm water (40°C max) and leave for 24 hours or until fully dry before replacing into the machine.
Taking care of your machine Storing extension hose on vacuum cleaner (optional) Let’s talk technical IMPORTANT: Unplug and switch off vacuum cleaner before performing maintenance or troubleshooting checks. Removing debris from the brushbar Pull hose out of hose to machine connector. Attach accessory hose to extension hose. Wrap hose around hose guide. Over and behind carry handle. Into hose to machine connector. Using a pair of scissors remove any threads or hair caught around the brush bar.
Let’s talk technical What to do if it goes wrong Removing a blockage from the hose Problem Solution • Check the ‘This pack contains’ panel on the box to make sure the part is included with your vacuum cleaner. Is there an accessory missing? Pull hose out of hose to machine connector. Lift clip under the hose inlet. Pull latch out and remove hose. Remove any blockage by inserting wire coat hanger into hose. Line up latch, push until it clicks into place.
Getting in touch Accessories Don’t forget your accessories! Order at: www.vax.co.uk/spares-and-solutions Pro cleaning kit (Type 2) 1-1-133326-00 All our best tools all in one kit that makes cleaning your home quicker, easier and with even better results. We’ve taken care of cleaning all of the hard to reach areas such as on top of cupboards and in between blinds to the dust that collates behind and within the radiator.
Notes U86-FN_Pe_FlairEasy-Store_UG_[J2543]_Amd_01.07.14.
@VaxUK Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Version 1.0 EEC Statement of Compliance: Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the U86-AN-(Be, Pe) is manufactured in compliance with the following Directives: Safety: 2006/95/EC Low Voltage Directive. EMC: 2004/108/EC Electromagnetic Compatibility Directive. Waste electrical products should not be disposed of with household waste.
