Use and Care Manual

15
for those who appreciate quality, reliability & performance
Upright&PortableCleaner
Upright&PortableCleaner
The Hard Floor Pad and The Portable Cleaner
THEHARDFLOORPAD
ByattachingtheoptionalHardFloorPadtoyourUltimate
G, you may dust bare floors. While the Ultimate G is turned
OFF, raise the Power Nozzle
o
25 as far as it will go by press-
ing the Toe-Touch Control
™
BottomPedal
o
9 . Attach the
HardFloorPadontothenozzleopeningusingthespring
clips on the plate. Then lower the Power Nozzle by pressing
the Toe-Touch Control Upper Pedal
o
8 one notch at a time
until the bristles touch the floor.
NOTE:TheHardFloorPadshouldonlybeusedwhenthe
Ultimate G is in the Straight Suction Cleaner mode. When
usingtheHardFloorPad,lowerthenozzleuntilthebristles
touch the bare floor. ❏
PORTABLECLEANERSET-UP
BesidesbeingaremarkableUprightCleaner,theUltimate G
can easily be converted into a portable cleaner for mattresses
and carpeted stairs.
To convert your Ultimate G to a Portable Cleaner,
make sure the Ultimate G is turned OFF, unplugged,
and the TechDrive
®
is disengaged.
ThenreleasetheOuterPermanentBagTopfromtheBag
Support
o
16bypressingtheBagReleaseButton
o
16 and sliding
the bag top off. ➤
Remove the cord from the handle. With the Upright
Handle
o
17intheverticalposition,pushtheHandle
ReleaseButton
o
14 , located at the base of the handle,
andpullthehandlestraightupandoutoftheslot.(Bag
not shown for clarity.) ➤
InsertthePortableHandle
o
15 into the slot where the
UprightHandlewasconnected.PushthePortable
Handleintotheslotuntilitsnapsintoplace.➤
1
2
3
CAUTION:
BeforeinstallingtheHardFloorPad,turnunitOFF,unplugthepowercord
from the wall outlet and be sure the motor and nozzle brush have stopped.
!