Operator's Manual

g191303
Figure128
1.Section-bypassvalve3.Quick-connectcoupler
(sectionsupplyhose)
2.Quick-connectpins4.Quick-connecttting
(agitationvalvemanifold)
4.Looselyassembletheangeclampsthatyou
removedinRemovingtheSection-Manifold
Valve(page83)totheangesofthe
section-valvemanifoldandtheangesofthe
othersection-valve(s)and/orcouplingadapter
(Figure129).
g191300
Figure129
1.Flange(couplingadapter)3.Section-manifoldvalve
2.Flange(section-manifold
valve)
4.Flangeclamps
5.Forleftorrightsection-valvemanifolds,
assemblethesection-valvemanifoldtothevalve
support(Figure127)withthe2ange-head
bolts(1/4x3/4inch)and2angelocknuts
(1/4inch)thatyouremovedinRemovingthe
Section-ManifoldValve(page83).
6.Torquetheange-headboltsandangelocknuts
to1978to2542N∙cm(175to225in-lb).
7.Tightenthe2angeclampsbyhand(Figure
129).
8.Assemblethequick-connectcouplerofthe
sectionhoseontothequick-connectttingofthe
section-valvemanifoldwiththequick-connect
pin(Figure128).
9.Ifyouloosenedthemountinghardwareoftheleft
orrightsection-valvemanifolds,tightenthenut
andboltto1978to2542N∙cm(175to225in-lb).
InstallingtheAgitation-Manifold
Valve
1.Aligntheangeoftheagitation-valvemanifold
and3gasketswiththeangesofthe
agitation-bypassvalve,pressurelterhead,and
couplingadapter(Figure130andFigure131).
Note:Ifneeded,loosenthemountinghardware
forthepressure-lterheadasneededtoprovide
clearance.
g191302
Figure130
1.Manifold(agitationvalve)4.Flange-headbolt(1/4x
3/4inch)
2.Valvesupport
5.Gasket
3.Flangelocknut(1/4inch)
87