Operator's Manual

2.Removethe3angeclampsthatsecurethe
agitation-valvemanifoldtotheangesofthe
pressure-lterheadandthecouplingadapter
(Figure118).
3.Removethe2ange-headbolts(1/4x3/4inch)
and2angelocknuts(1/4inch)thatsecurethe
agitation-valvemanifoldtothevalvesupport
(Figure119).
g191302
Figure119
1.Manifold(agitationvalve)4.Flange-headbolt(1/4x
3/4inch)
2.Valvesupport
5.Gasket
3.Flangelocknut(1/4inch)
4.Removetheagitation-valvemanifoldand
gasketsfromthemachine(Figure119).
Note:Ifneeded,loosenthemountinghardware
forthepressure-lterheadasneededtoprovide
clearance.
Note:Retaintheangeclamps,gaskets,and
quick-connectpinsforinstallationinInstalling
theAgitation-ManifoldValve(page87).
RemovingtheSection-Manifold
Valve
1.Removethequick-connectpinthatsecuresthe
quick-connectcouplerforthesection-bypass
valvetothesection-manifoldvalve(Figure120).
g191303
Figure120
1.Section-bypassvalve3.Quick-connectcoupler
(sectionsupplyhose)
2.Quick-connectpins4.Quick-connecttting
(agitationvalvemanifold)
2.Removethequickconnectpinthatsecuresthe
quick-connectcouplerforthesectionsupply
hosetothemanifoldforthequick-connecttting
ofthesection-manifoldvalve(Figure120).
3.Removethe2angeclampsthatsecurethe
section-manifoldvalvetotheangesofthe
adjacentcomponents(Figure121).
83