User's Manual
Table Of Contents
- Table of Contents
- Table of Figures
- 1. System Description
- 1.1. IS-900 Configuration
- 1.2. IS-900 SimTracker & VETracker Processor
- 1.3. SoniStrips, SoniFrame, SoniWing & SoniPod acoustic pulse transmitters
- 1.4. Acoustic Constellation Mounting Considerations
- 1.5. Tracking Station Description
- 1.6. IS-900 Cables, Connectors, Adaptors, Power Boosters and Wireless Radios
- 1.7. IS-900 Support CD
- 2. Specifications
- 3. Installation and Set-up
- 4. Interface Communication Protocol
- 5. LCD Status & Settings Screen
- 6. Appendix A – Frequently Asked Questions
- 7. Appendix B – Troubleshooting & Tips
- 8. Appendix C – Health & Safety Warnings with Tracker Use Guidelines
- 9. Appendix D – Care & Maintenance
- 10. Appendix E – ISDEMO Reference
- 11. Appendix F – GENLOCK Synchronization
- 12. Appendix G – Developers Instructions
- 13. Appendix H – Interface Protocol Commands – Quick Reference
InterSense Doc. No. 072-00105-0I07 Rev. 4.2
IS-900 User Guide Page 78 of 177
A Unique number identifying a Fixed PSE (beacon) within
a Constellation (a complete set of fixed PSEs). Numbering
starts at 1.
xp, yp, zp FPSE position in meters.
xn, yn, zn Normal vector.
IDcode Hardware ID of the PSE.
<> CR LF pair.
Disassociate Fixed PSE from the Constellation
MCf[Fixed PSE number, IDcode]<>
If PSE number and IDcode are not associated in the
current configuration, this command is ignored. This
command does not take effect until explicitly activated by
the MCe<> command.
Clear All Fixed PSEs (Constellation) Command
MCC<>
Delete all Fixed PSEs from the configuration. This
command does not take effect until explicitly activated
by the MCe<> command.