User's Manual
Table Of Contents
- Table of Contents
- Table of Figures
- 1. System Description
- 1.1. IS-900 Configuration
- 1.2. IS-900 SimTracker & VETracker Processor
- 1.3. SoniStrips, SoniFrame, SoniWing & SoniPod acoustic pulse transmitters
- 1.4. Acoustic Constellation Mounting Considerations
- 1.5. Tracking Station Description
- 1.6. IS-900 Cables, Connectors, Adaptors, Power Boosters and Wireless Radios
- 1.7. IS-900 Support CD
- 2. Specifications
- 3. Installation and Set-up
- 4. Interface Communication Protocol
- 5. LCD Status & Settings Screen
- 6. Appendix A – Frequently Asked Questions
- 7. Appendix B – Troubleshooting & Tips
- 8. Appendix C – Health & Safety Warnings with Tracker Use Guidelines
- 9. Appendix D – Care & Maintenance
- 10. Appendix E – ISDEMO Reference
- 11. Appendix F – GENLOCK Synchronization
- 12. Appendix G – Developers Instructions
- 13. Appendix H – Interface Protocol Commands – Quick Reference
InterSense Doc. No. 072-00105-0I07 Rev. 4.2
IS-900 User Guide Page 134 of 177
Display Menu
Start Displaying Data
Turns the display on. Configured stations are displayed in
green when tracking, or in red if lost. When display is on,
SoniDiscs in the Constellation are displayed in green when
they are used for tracking or in red, if range measurements
received are rejected by the tracker. During normal operation
SoniDiscs should not consistently appear red. If they do, for
different positions and orientations of the tracker, the
Constellation should be examined for configuration errors.
The IS-900 only uses the SoniDiscs in the immediate vicinity
of a station, all others are ignored and will be drawn in white.
Stop Displaying Data Turns the display off. Constellation editor commands can
only be used when display is off.
Zoom In/Out Changes the scale factor of the display. Current zoom setting
is displayed at the bottom of the screen.
Current Station Changes which station ISDEMO will show as the primary
station. Certain functions, such as Center Tracker (from the
Edit menu) will depend on which station is the current primary
station.
Display Options Hardware IDs of the SoniDiscs and ultrasonic range
measurements can optionally be displayed along with the
positions of the configured stations.
View In most cases a Constellation is installed horizontally over
the tracked area, so XY view is the default. In other cases, XZ