Datasheet

DB15 DB0
SCLK
D
IN
SYNC
t
SYNC
t
SUCL
t
SUD
t
DHD
t
L
t
H
t
CS
|||
|
|
||
1 2 13 14 15 16
f
CLK
1
OUTPUT
VOLTAGE
DIGITAL INPUT CODE
0
0 1023
ZE
FSE
GE = FSE - ZE
FSE = GE + ZE
1023 x V
A
1024
DAC101S101, DAC101S101-Q1
www.ti.com
SNAS321F JUNE 2005REVISED MARCH 2013
POWER EFFICIENCY is the ratio of the output current to the total supply current. The output current comes from
the power supply. The difference between the supply and output currents, is the power consumed by the
device without a load.
SETTLING TIME is the time for the output to settle within 1/2 LSB of the final value.
WAKE-UP TIME is the time for the output to settle within 1/2 LSB of the final value after the device is
commanded to the active mode from any of the power down modes.
ZERO CODE ERROR is the output error, or voltage, present at the DAC output after a code of 000h has been
entered.
Transfer Characteristic
Figure 3. Input / Output Transfer Characteristic
Timing Diagram
Figure 4. DAC101S101 Timing
Copyright © 2005–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DAC101S101 DAC101S101-Q1