Integrator's Manual

103
7.3 Upgrading a FLX24 from SD to HD
Upgrading the FLX24 from SD only (3 channels) to HD (2 channels) requires the purchase of an
upgrade license key from Technicolor. To purchase a key, contact your distributor. Once an
upgrade license has been purchased, it is applied using the – COM1000 Pairing Info Page as
shown in Figure 57 below. To apply a key, an entry is made in the Key Entry text box using the
format shown above the text box:
Chassis-slot-tuners RID KEY
The chassis-slot-tuners RID entries can all be cut and pasted from the list above the key entry
text box. The KEY value is the key purchased through your distributor. Once all key entries have
been typed into the text box, clicking on the Submit Query radio button will apply them. Once a
key has been successfully accepted by a COM24FLX card it will revert to two tuner mode and
will be capable of receiving HD programming.