Connect Setup uk 06 2017 V3

20
|
Systemair Connect set-up
In the alarm status dialogue you can change status of
current alarms via the “Acknowledge”, “Block” or
“Unblock”. You just select the alarm and select whether
you want to Acknowledge or Block the alarm. If you
select “Acknowledge”, the alarm will be turned off and it
will reappear if the same error occurs. If you select
“Block”, the alarm will be turned off, and it will not come
back. Blocked alarms can be activated again via
“Unblock”.
On the seventh tab you can edit the settings for
the air handling unit elements.