Instruction Manual

Table Of Contents
0458-728-9621-A
29
English
7 Attaching AP Belt Bag with Connecting Cable
7.1 Attaching the “Belt bag AP with connecting
cord”
Open the Velcro® fastening on the strap (1) and pull the
strap (1) out of the ring (2).
Feed strap (1) through belt (3).
Feed strap (1) back through the ring (2) and the belt (3).
Close the Velcro® fastening on the strap (1).
Push battery (4) as far as it will go into the belt bag (5).
A short beep will sound.
Secure battery (4) with the Velcro® fastening (6).
8.1 Adjusting the Connecting Cable
The connecting cable can be adjusted to suit the user’s size,
different cordless products and the application.
The length of the connecting cable can be adjusted by
making a loop (1) and securing it to the belt bag (3) with the
fastener (2).
Fit the connecting cable so that it is as short as possible
without hindering your work.
7 Attaching AP Belt Bag with
Connecting Cable
1
0000-GXX-3660-A1
3
2
1
3
0000-GXX-3416-A2
1
1
8 Adjusting AP Belt Bag with Connecting
Cable for User
4
0000-GXX-3417-A2
6
5
2
0000-GXX-3418-A0
1
3