Manual

Instruction Manual
4
Checking the Hub Installation
To check the USB hub installation in Windows Device Manager, follow these steps:
1. Click Start
2. Click Control Panel
3. Click System
4. Click Device Manager
5. Double click Universal Serial Bus Controller
6. Double click Generic USB HUB
7. The message should show that the device is working properly
Specications
Operating Temperature 0° to 55°C (32 to 131°F)
Operating Humidity 5 to 95% RH
Dimensions (LxWxH) 4.50”(L) x 2.26”(W) x 1.03”(H)
(11.45 x 5.73 x 2.63cm)
Storage Temperature -20° C to 85°C (-4°F to 185°F)
OS Compatibility OS independent; No software or drivers
required