Owner's manual

9
About Multi-Screen Modes
Select [Span] in [Bus Structure] to switch to the Span mode. This mode extracts the horizontal center portions of the video, then
splits in half to output and scale each half to each output. Source video at 16:9 is output as video at a wide 32:9 in the Span mode.
PinP, Key and DSK are not available in Span mode.
fig.span-mode-image.eps
In the Span mode, the internal signal flow is shown below.
fig.span-mode-flow.eps
Span Mode
1:PGM 2
Still Image
Background Color
1234 5678 910 11 12 13 14
1:PGM PVW
Input Select
Output Fade
Scaler
HD-SDI/SD-SDI (1:PGM)
DVI-D/HDMI (1:PGM)
RGB/COMPONENT
SD (COMPOSITE/S-VIDEO)
2
HD-SDI/SD-SDI (2)
DVI-D/HDMI (2)
Scaler Scaler
* The PVW scaler setting follows the setting
of PGM scaler.
Independent setting is not possible.