User Manual Before operating this unit, please read the user manual completely and keep it. If the manual is lost, you can send e-mail to overseas@robam.com, request for an electronic manual.
CONTENTS Safety Precaution..................................................................................................................21 Important Information............................................................................................................26 Product Description...............................................................................................................26 Packing List............................................................................................
Range Hood READ AND SAVE THESE INSTRUCTIONS Dear users: Thank for your buying our range hood. Please accept our best regards.Please read this user manual carefully before installation and operation.*The pictures in this manual only for your reference. If the picture isn’t accord with object, subject to object. We keep to right to update appearance, structure or products without notice.
Range Hood Danger Please turn off range hood immediately if pan got fire (range hood shall aggravate fire if it’s working) and extinguish fire by effective action. Strict For example, cover flame by metal cover, turn off gas valve immediately Execution and remove inflammable things. Strict Execution Any abnormal, please turn off power, take off plug or cut off electric source, and contact service. It’s possible to cause electric shock or fire if using range hood under abnormal situation.
Range Hood Warning Strict Execution There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels. For Residential Use Only.And it’s not allowed to exhaust dangerous or explosive matter or air. It should be put under dry and ventilation Strict Execution environment without dangerous air. The range hood and electric circuit must be installed by skilled and trained personnel with required qualification.
Range Hood Warning TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE: a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings. b) Always turn hood ON when cooking at high heat or when flambeing Strict food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe'). Execution c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. d) Use proper pan size.
Range Hood Warning Strict Execution Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction Strict concerning use of the appliance by a person responsible for their Execution safety.
Range Hood Notice Strict Execution Accessible parts may become hot when used with cooking appliances. DISPOSAL: Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product must not be disposed together with the domestic waste. This product has to be disposed at an authorized place for recycling of electrical and electronic appliances.
Range Hood Size 15-3/4”(400mm) min22”(560mm) max35”(890mm) 3”(75mm) 10-5/8”(270mm) 21-1/4”(540mm) 29-7/8”(758mm) The size marked is for reference only. Packing List Please check the items in the container upon unpacking Standard Offerings 1 Flexible aluminum duct 1 1 Range hood User Manual 1 4 Plastic expansion pipe Check valve 1 4 4×60wood screw Gasket 10 1 ST4.2×18 self tapping screw Oil cup 6 1 ST4.
Range Hood Installation Warning 1.The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels, the discharge of air must fulfill the requirements of local regulations. 2.Note that when installing the metal expansion pipe, the pipe shall match with the hole in size. Overlarge hole is prohibited, as it will result in loose pipe and accidental drops. 3.
Range Hood Notice ● Installation and circuit setting must be done by experienced professionals. Only a professionally trained person with an installation qualification can install the hood. Non-professionals are not allowed to install, dismantle and repair the hood. ●Please do not power on the hood before installation to avoid electric shock.
Range Hood 2-7/16” (62±2mm) 3. Determine the positions to fix the hitching leg and the hitching leg stop block. 2-3/16” (55mm) 20-1/2” (520mm) 4-5/16” (110mm) Note: The hitching leg must be fixed on the beam with a screw. With the stove bearing surface as the base, mark the drill holes in the corresponding position of the wall according to the distance from the hitching leg hole to the bottom of the 3 31-1/2-35-7/16” (800-900mm) machine, and the height of the bottom of the hanging cabinet.
Range Hood 6. Pull the two supports of the attached panel of the mainframe with both hands and pull them upward, tear off the protective film of the panel and the attached panel of the mainframe, and insert the attached panel of the mainframe back along the gap between the panel of the mainframe and the shell. 7.
Range Hood 10. At this time, there is still a certain gap between the attached panel of the mainframe and the roof, so the attached panel of the mainframe should be pulled out and pushed to contact with the roof, and then the attached panel of the mainframe should be fixed on the roof with ST4.2×18 screws. 11. After installation, the whole machine must be kept horizontal. In the end, insert the oil cup into the hitching leg on the bottom of the mesh enclosure and power it for trial operation.
4-5/16” (110mm) 2-3/16” (55mm) 3 / 8 ”(10mm) 31-1/2-35-7/16” (800-900mm) 2-3/16” (55mm) 25-9/16-29-9/16” (650-750mm) 20-1/2” (520mm) 2-7/16” (62±2mm) Range Hood 4. Drill a hole 2-3/8-2-3/4”(60-70mm) deep (not too large) at the mark with a drill bit with a diameter of 5/16”(8mm), press 10 12 14 16 the expansion pipe into the hole, and reliably fix the hitching leg with 4×60mm wood screws supplied with the machine. Use a level ruler to make sure the hitching leg is in a horizontal position.
Range Hood 7. Pull the two supports of the attached panel of the mainframe with both hands and pull them upward, tear off the protective film of the panel and the attached panel of the mainframe, and insert the attached panel of the mainframe back along the gap between the panel of the mainframe and the shell. 8.
Range Hood 11. After installation, the whole machine must be kept horizontal. In the end, insert the oil cup into the hitching leg on the bottom of the mesh enclosure and power it for trial operation. User Manual Switch control panel Lighting Airflow control strip When the power is turned on, the buzzer sounds and the power is turned on. Power When the power is on, press the power button to wait, and the fan can be turned on at this time.
Range Hood Considerations ●The hood shall be cleaned and maintained regularly depending on the surroundings, so as to keep its cleanness & efficiency and extend its service life. We recommend that: Clean the outer surface of range hood after each cooking. ●It is recommended to use a neutral detergent to clean instead of strong detergents, and dry with a soft cloth. If your range hood is a mechanical switch, and should avoid the cleaning agent from contacting each control button.
Range Hood Switch removal 1. Unplug the power plug; 2. Unscrew two screws from the cover plate and remove it; 3. Unscrew the two screws on the switch cover plate, rotate and turn inside out the switch cover plate, pull out the switch assembly and unplug the lamp connector terminal to repair or replace the lamp. Mesh Enclosure Removal 1. Take down the oil cup with both hands at first; 2. 1.
Range Hood In general, the range hood body does not need to remove. The removal needs to be completed by professional maintenance staff.
Range Hood Troubleshooting of General faults Serial number Fault 1 No response after pressing any icon (e.g.
