OWNER’S MANUAL 24V UTV this manual contains important safety, performance and maintenance information. read the manual before taking your first ride or allowing your child to ride your new electric ride- on toy. keep the manual handy for future reference. DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 9 AM – 5 PM ET FOR AGES 3+ MAXIMUM WEIGHT: TOTAL 130 lb (59 kg), 65 lb (29.
TABLE OF CONTENTS A Introduction, Safety and Warnings. . . . . . . . . . . . . . . . 2 B Before You Begin Assembly. . . . . . . . . . . . . . . . . . . . 6 C Parts Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . 7 D Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 E How to Use Your Ride-on Toy . . . . . . . . . . . . . . . . . . 19 F Detailed Maintenance and Repair . . . .
INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This Manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on toy. By reading this manual before you let your child go out on his/her first ride, you will know how to get the most from your new electric ride-on toy.
RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 130 LB (59 KG) AND MUST BE OVER 3 YEARS OLD. NEVER ALLOW MORE THAN 2 CHILDREN TO RIDE THE RIDE-ON TOY SIMULTANEOUSLY. The age grade for the electric ride-on toy is for 3 years and older.
SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear appropriate clothing and shoes. • Observe the age and weight limitations on the cover of this manual. • Always stay seated while riding the electric ride-on toy. • Children must be supervised by an adult at all times to be safe. • Always be alert and ride your electric ride-on toy defensively.
• Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts.
BEFORE YOU BEGIN ASSEMBLY B Remove all packing and items from the display box. NOTE: Parts are packaged at both ends of box and in ride-on chassis. Ensure all parts are present before assembly. ESTIMATED ASSEMBLY TIME Because this ride-on toy is heavy and large, we strongly suggest two people to complete assembly. Allow approximately 60 minutes for assembly by two people, not including initial charging time. Initial charging can take approximately 18 hours (see page 17 for charging information).
PARTS DIAGRAM C 1 20 2 26 24 19 3 18 4 17 23 22 15 16 16 21 23 5 25 6 26 13 11 10 14 9 7 8 12 11 10 1. Roof x1 2. U shape Support x2 3. Roof Front Support x2 4. Steering Wheel Assembly x1 5. Cargo Basket x1 6. Plastic Body Assembly x1 7. Ø19 Front Axle Washer x2 8. Front Wheel x2 9. Ø12 Washer x4 10. M10 Lock Nut x4 11. Split Pin x4 12. Axle Cap x4 13. Rear Wheel x2 9 14. Rear Axle x1 15. Battery x1 16. Cargo Bed (5 pcs) 17. Seat (2 pcs) 18. Roof Rear Support x2 19. Charger x1 20.
ASSEMBLY D Your new ride-on toy requires adult assembly. Because your new ride-on toy is heavy and large, we strongly suggest using two people to finish assembly. Set aside around 60 minutes for assembly. Identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded.
2. C ARGO BED INSTALLATION • Align the cargo bed assembly with the four screw holes on the ride-on toy body. Use four M5x16 machine screws to tighten each corner securely.
3. FRONT WHEEL ASSEMBLY • Turn the ride-on toy body upside down (this should be handled carefully by two adults) • Cut the tie on the front axle with scissors. • Adjust the front wheel axle until the axle clicks into position to ensure that it is secure for safety (see Figure A). • Remove washers and nuts from the front wheel axle. A Wheel Axle Axle Cap Front Wheel Ø12 Spilt Pin Washer CAUTION: To avoid pinching your fingers, do not put your hand into the slot when adjusting the front wheel axle.
• Find a rear wheel marked with an “R” and labeled “Rear”. Find the “R” marking at the rear end of the ride-on toy body to match this wheel and slide the wheel onto the axle. • Insert a Ø12 washer onto the axle. • While holding the rear axle with a 17 mm socket wrench, fit the M10 locknut to the end of the rear axle with another 17 mm socket wrench. DO NOT over tighten; the rear axle ends are supposed to be exposed; 1-2 threads exposed is acceptable.
5. STEERING WHEEL ASSEMBLY • Gently turn the ride-on toy body upright. • Remove the M5x35 machine screw and nut from the steering wheel. • Insert the steering wheel onto the end of the steering column, line up the hole in the steering wheel and the hole in the steering column, reinsert the M5x35 machine screw as shown, and tighten it with M5 nut securely. 6. S TEERING WHEEL BATTERIES INSTALLATION Steering Wheel Screwdriver M5 Nut M5x35 Machine Screw + DC 1.5V (SIZE AA) DC 1.
7. ROOF ASSEMBLY • Find the roof and two U shape supports as shown. • The U shaped supports are marked with either an “L” or “R”. Find the corresponding “L” and “R” markings on the roof panel and then fit each U shaped support to the corresponding spot on the roof panel as shown in the diagram to the right. • Secure the U shaped supports to the roof using 3 4x16 mm round head screws on each support, as shown in the diagram at right. 8.
9. ROOF REAR SUPPORTS ASSEMBLY “L” Mark • Find the Rear Support marked with an “R” and attach it to the corresponding U shaped support also marked with an “R”. Use two 4x12 mm round head screws to secure the supports, as shown at right. • Find the other Rear Support, marked with an “L” and attach it to the corresponding U shaped support also marked with an “L”. Use two 4x12 mm round head screws to secure the supports as shown at right. 10.
11. CARGO BASKET ASSEMBLY 1 • Place the Basket into the four corresponding holes in the Hood and push down until it clicks into place. Use four 4x16 mm round head screws to secure the basket to the Hood, as shown in diagram 1. • If you do not want the Basket on the Hood, find the four small end caps supplied in the bag with the owners manual (diagram 2) and snap the end caps into the corresponding holes in the hood (diagram 3).
12. POWER SUPPLY CONNECTION Battery NOTE: The battery is disconnected for shipment to prevent the battery from draining. • Securely plug the battery connector into the control module connector. 13. SEAT INSTALLATION Control Module Connector • Find Seat Back that marked “6” on its back, also find the Seat Bottom marked 7 “7” on its back. • Locate the Seat Back on the ground and insert the Seat Bottom into the Seat Back as shown.
BATTERY CHARGING IMPORTANT! Before first time use, charge the battery for at least 18 hours. Charge the battery for at least 12 hours after each use of the ride-on toy. Never charge the battery longer than 30 hours. Overcharging or undercharging the battery may shorten battery life and decrease ride-on toy running time. WARNING: Battery can fall out and injure a child if the ride-on toy tips over. Always use battery cover. PREVENT FIRE • Never modify the electrical system.
• Do not charge the battery on a surface (such as a kitchen counter top) which could be damaged by the acid contained inside the battery. Take precautions to protect the surface on which you charge your battery. • Use only an original charger (AC 120V 60Hz) with an output of DC 24V (1A) to charge your ride-on toy battery. • NOTE TO ADULTS: Regularly examine the charger for damage to the cord, plug, housing or other parts that may result in the risk of fire, electric shock or injury.
HOW TO USE YOUR RIDE-ON TOY E Sound Button Foot Pedal 23.0 Forward/Reverse Shift Lever Power Switch POWER SWITCH • Turn the ride-on toy on or off. FOOT PEDAL • To move the car, press the foot pedal down. • To stop, take your foot off the foot pedal. FORWARD-REVERSE SHIFT LEVER • To move the car forward at high speed, shift the lever to the “2” position. • To move the car forward at low speed, shift the lever to the “1” position. • To move the car backward, shift the lever to the “R” position.
Audio Input Cable (Included) MP3 Audio Input Jack MP3 here Audio Input Jack Use the Audio input cable (Included) to connect your MP3 player or other compatible audio device with this ride-on toy to listen to and enjoy music. 1. Plug one end of the audio input cable (Included) into the audio input jack on the ride-on toy as shown. 2. Plug the other end of the audio input cable into the headphone jack on your audio device or MP3 player. 3. Adjust your audio device or MP3 player volume to low level. 4.
IMPORTANT • Always stop ride-on toy when changing the direction to avoid damage to the gears and motor. • This ride-on toy has an adjustable seat belt; instruct children on how to fasten the seat belt before using. • Do not let any child touch the wheels or be near them when the car is moving. • To avoid accidents, inspect the ride-on toy before riding to ensure that it is in proper working order and safe to ride. • This toy has no brake; to stop, remove foot from the foot pedal.
DETAILED MAINTENANCE AND REPAIR F WARNING: Disconnect power supply before conducting any maintenance procedures. TOOLS REQUIRED: Phillips Screwdriver 17 mm Socket Wrench (included) (not included) Flat head Screwdriver (not included) Needle-Nose Pliers (not included) HOW TO REPLACE FRONT WHEEL 1. Remove the axle cap by sliding a flat head screwdriver along the edge of the cap and carefully prying the cap open. 2. Use needle nose pliers to remove the split pin in the hole of the front axle end. 3.
HOW TO REPLACE REAR WHEEL AND GEAR BOX 1. Remove the axle cap by sliding a flat head screwdriver along the edge of the cap and carefully prying the cap open. 2. Use needle nose pliers to remove the split pin in the hole of the rear axle end. 3. Remove the M10 locknut with a 17 mm socket wrench. 4. Remove the Ø12 washer. 5. Remove the rear wheel and replace with a new wheel. – If you need to replace the gear box, proceed to the next step before putting on the new wheel. 6.
HOW TO REPLACE THE FOOT PEDAL 1. Use a flat head screwdriver to gently pry the LEFT side of foot pedal. 2. Gently remove the foot pedal. 3. Disconnect the old foot pedal from the pedal switch socket. 4. Replace and reconnect the new foot pedal to the pedal switch socket to ensure they are connected in the correct position (see Figure 3) and then insert the right side of the foot pedal into the foot pedal compartment first, and gently push down on the left side of the pedal so that it snaps into place.
HOW TO REPLACE FORWARD-REVERSE SHIFT LEVER 1. Unscrew the two screws on the seat and remove the seat. 2. Unscrew four 4x12 round head screws as shown to remove the Forward-Reverse Shifter Assembly from the ride-on toy body (diagram A). 3. Unplug the switch sockets from the Forward-Reverse switches (diagram B). 4. Use a flat head screwdriver to pry off the shift lever cover, and then unscrew the 4x16 mm flat head screw and remove the shift lever (diagram C). 5.
BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: DISPOSAL: This product contains sealed lead acid batteries which must be disposed of or recycled in an environmentally safe manner. Do not dispose of the batteries in your household trash.
MAINTAINING YOUR RIDE-ON TOY Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the ride-on toy indoors or cover it with a tarp to protect it from wet weather. Keep the ride-on toy away from sources of heat, such as stoves and heaters. Plastic parts may melt. ADULTS ONLY: Recharge the battery after each use. Recharge the battery at least once a month when the ride-on toy is not being used. DO NOT wash the ride-on toy with a hose.
TROUBLE SHOOTING GUIDE G Problem Possible Cause Solution Ride-on toy does not run Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the ride-on toy for the first time. After first-time use, recharge the battery for at least 12 hours after each use. Never charge the battery longer than 30 hours. Check all connectors.
Problem Possible Cause Solution Ride-on toy was running but suddenly stopped Loose wires or connectors Check all wires and connectors. Make sure the battery connector is tightly plugged into the control module connector, and that there are no loose wires around the motor. Tripped thermal fuse The thermal fuse may “trip” and shut down operation if the ride-on toy is overloaded or the driving conditions too severe.
Problem Possible Cause Solution Ride-on toy runs sluggishly Undercharged battery Charge the battery. A new battery should have been charged for at least 18 hours before using the ride-on toy for the first time. After first-time use, recharge the battery for at least 12 hours after each use. Never charge the battery longer than 30 hours. Check all connectors. Make sure the battery connector is tightly plugged into the control module connector, and that the charger is plugged into the wall outlet.
LIMITED WARRANTY FREE WARRANTY UPGRADE WITH REGISTRATION CONSUMER ACTION REQUIRED dynacraftwheels.com/register UPGRADE YOUR WARRANTY WITH PRODUCT REGISTRATION Free warranty upgrade with online registration at dynacraftwheels.com/register. We respect your privacy. Any information collected by Dynacraft Wheels will never be shared with any other company or organization. See Dynacraft's privacy policy for further information: dynacraftwheels.com/dynacraft-privacy-policy.
LIMITED WARRANTY This Limited Warranty (“Warranty”) extends only to the original retail purchaser, who must provide proof of purchase to validate any claim. As noted below, certain aspects of this Warranty can be extended free of charge to original retailer purchasers who also register their product using the provided online registration form. Proper registration via Dynacraft’s online registration form is the only way to obtain these noted extensions.
DO NOT RETURN THIS ITEM TO THE STORE CONTACT DYNACRAFT CUSTOMER SERVICE FOR ASSISTANCE dynacraftwheels.com/contact or 1-800-551-0032 9 AM – 5 PM ET Please have the following information available: Model Number Example: 8000-00 Production Date Example: MM.DD.YYYY Serial Number Example: DA00000000000 This information is required to help us handle your request effectively. Dynacraft BSC, Inc.