System information

273
T1000-TM-EN- 1.0
273
VLAN Port Status
This page provides VLAN Port Status.
VLAN USER
VLAN User module uses services of the VLAN management functionality to configure VLAN
memberships and VLAN port configuration such as PVID, UVID. Currently we support following VLAN
User types:
CLI/Web/SNMP : These are referred to as static.
NAS : NAS provides port-based authentication, which involves communications between a Supplicant,
Authenticator, and an Authentication Server.
MVR : MVR is used to eliminate the need to duplicate multicast traffic for subscribers in each VLAN.
Multicast traffic for all channels is sent only on a single (multicast) VLAN.
MSTP : The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to create multiple spanning
trees in a network, which significantly improves network resource utilization while maintaining a loop-
free environment.
Port
The logical port for the settings contained in the same row.
PVID
Shows the VLAN identifier for that port. The allowed values are 1 through 409. The default value is 1.
Port Type
Shows the Port Type. Port type can be any of Unaware, C-port, S-port, Custom S-port.
If Port Type is Unaware, all frames are classified to the Port VLAN ID and tags are not removed.
C-port is Customer Port. S-port is Service port. Custom S-port is S-port with Custom TPID.
Ingress Filtering
Shows the ingress filtering on a port. This parameter affects VLAN ingress processing. If ingress filtering
is enabled and the ingress port is not a member of the classified VLAN, the frame is discarded.
Frame Type