System information

149
The frame type for the ECE. The possible values are:
Any: The ECE will match any frame type.
IPv4: The ECE will match IPv4 frames only.
IPv6: The ECE will match IPv6 frames only.
DSCP Filter
The DSCP filter for matching the ECE. The possible values are:
Any: No DSCP filter is specified. (DSCP filter status is "don't-care".)
Specific: If you want to filter a specific DSCP value with this ECE, choose this value. A field for entering a
specific value appears.
Range: If you want to filter a specific DSCP range filter with this ECE, choose this value. A field for
entering a range appears.
DSCP Value
When "Specific" is selected for the DSCP filter, you can enter a specific value. The allowed value is from
0through 63.
DSCP Range
When "Range" is selected for the DSCP filter, you can enter a specific range. The allowed range is from 0
through63.
Actions
Direction
The EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE
Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports will be setup to match
the traffic being forwarded to NNI ports. The possible values are:
Both: Bidirectional.
UNI-to-NNI: Unidirectional from UNI to NNI.
NNI-to-UNI: Unidirectional from NNI to UNI.
EVC ID Filter
The EVC ID for the ECE. The ECE is only active when mapping to an existing EVC. The possible values
are:
Any: No EVC ID filter is specified. (EVC ID filter status is "don't-care".)
Specific: If you want to filter a specific EVC ID with this ECE, choose this value. A field for entering a
specific value appears.
EVC ID Value
When "Specific" is selected for the VLAN ID filter, you can enter a specific value. The allowed value is
from 1through 4096.
Policer ID Filter
The policer ID filter for matching the ECE. The possible values are:
Specific: If you want to filter a specific policer ID value with this ECE, choose this value. A field for
entering a specific value appears.
Discard: All received frames are discarded for the ECE.
None: All received frames are forwarded for the ECE.
None:The bandwidth profile for the specified EVC ID is used.
Policer ID Value
When "Specific" is selected for the policer ID filter, you can enter a specific value. The value is from 1
through2048.