User Manual

14
1.RJ-45 LAN socket: Connect to PC or Hub/Switch. For connect to 10Base-T
Ethernet or 100Base-TX Fast Ethernet cabling. This Ethernet port built N-Way
protocol can detect or negotiate the transmission speed of the network auto-
matically.PleaseuseCategory5“straightthrough”cabletoconnecttheICA-601
toa100MbpsFastEthernetnetworkswitchorhub.
Note
In caseyouneedtoconnectthedevicetoPC ornotebookdirectly,
youshouldusecrossovercableinstead.
2.RS-485&DI/DO:Connecttoalocalkeyboardcontrollerandconnecttosensor
in and alarm out devices
InsidetheTELbox:
Name Function
12VDC DC 12V output (50mA maximum)
GND GND
D+ RS485 data +
D- RS485 data -
DI Digital signal input
DO Digital signal output
Note
The RS-485 of ICA-525 is master that can control external scanner.
3.LocalVideooutput(BNCport):
The Network Camera also provides composite
videooutput.UsercanuseBNCvideocabletoconnecttheNetworkCamerawith
a TV monitor or VCR.
4.DC-in Jack:
The input power is 12VDC. Note that supply the power to the
Network Camera with standard power adapter included in package. Otherwise,
the improper power adapter may damage the unit and result in danger.
5.Linein(audioin):
Connect an audio input source to the ICA-601.
6.Lineout (audioout):
Connect a loud speaker to the ICA-601. This function is
for voice alerting and two-way audio.