User Manual

English
71
ADDITIONAL INFORMATION
LED lightning messages
Message
Power LED Power LED
Temp-LED
Lamp-LED
(Red) (Blue) (Red) (Red)
Standby state
(Input power cord)
Steady light
Power on (Warming)
Flashing
(0.5 sec o󰀨 /
0.5 sec on)
Power on and Lamp
lighting
Steady light
Power o󰀨 (Cooling)
Flashing
(0.5 sec o󰀨 /
0.5 sec light). Back
to red steady light
when cooling fan
turns o󰀨.
Quick Resume (100
secs)
Flashing
(0.25 sec o󰀨 /
0.25 sec light)
Error (Lamp fail) Flashing Steady light
Error (Fan failure) Flashing Flashing
Error (Over Temp) Flashing Steady light
Standby State
(Burn in mode)
Flashing
Burnin (Warming) Flashing
Burnin (Cooling) Flashing
 Power o󰀨:
Power O󰀨
Power O󰀨?
Press power key again.
 Lamp warning:
Warning
Lamp Warning
Lamp life exceeded.
 Temperature warning:
Warning
TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 45 degree C.
If the problem persists in spite of the above.
Please contact a service center for repair.