Thermometer User Manual

2-25

Using the Handheld Infrared Thermometer

2.3.12 Erasing the Temperature Data from Memory

The user can erase all 100 temperature data points in

memory at any time by using the following procedure:

1. Pull the trigger and press the key. The

icon will appear.

2. Press the and keys in rapid sequence.

If the icon disappeared, repeat steps

1 and 2

The display freezes momentarily, and a beep

sounds for about 1 second. Now the memory

is cleared. The thermometer reverts to real

time mode.

Erasing the temperature data does not erase or

reset Emissivity, High and Low Alarm setpoints,

printing interval and Ambient Target Temperature

compensation

3. After all data is erased from memory, press the

key to unlock the trigger.

NOTE