Thermometer User Manual

Figure 2-14. Serial Printer Hookup

3. Pull the trigger and press the key to lock the

trigger. The

icon will appear on the display.

4. Press and hold the until the Print Data display

Mode (PRN) appears.

5. Press the key to increment the printing interval. Press

the key to decrement the printing interval. The

printing interval (from 1 to 1999 seconds) is the time

between data points. The default value is 2 seconds.

6. Press the key to start sending data. The

icon appears on the display.

To stop sending data, press the key again, and

the icon disappears.

RS-232

Digital

Cable

NOTE

Bottom hole is

the RS-232 jack

25-pin 'D'

Connector

6-pin

Phone Jack

To t h e

Printer

To the

Thermometer

Serial Printer

NOTE

°F

PRN

2-19

Using the Handheld Infrared Thermometer