Reference Manual (complete instructions)

28
Connecting to a Smart Device (SnapBridge)
Connecting the Camera and a Smart Device
C If the Connection Is Unsuccessful
• If the camera displays Could not connect. when connecting
-Press the k button and repeat the procedure from step 2 (A25) in “Connecting the
Camera and a Smart Device” to connect again.
-Press the d button to cancel the connection.
• The issue may be solved by relaunching the app. Close the SnapBridge app completely
and then tap the app icon again to launch it. When the app launches, repeat the
procedure from step 1 (A25) in “Connecting the Camera and a Smart Device”.
• If the camera cannot connect and an error occurs in iOS, the camera may be registered as
a device in iOS. Launch the iOS settings app and deregister the device (camera name) in
such cases.
Disabling or Enabling the Wireless Connection
Use any of the following methods to disable or enable the connection.
• Switch the setting in Network menu M Airplane mode in the camera. You can
set it to On to turn off all communication functions in places where wireless
communication is prohibited.
• Switch the setting in Network menu M Bluetooth M Connection in the
camera.
• Switch the setting in the A tab M Auto link options M Auto link in the
SnapBridge app.
You can reduce battery consumption of the smart device by disabling this setting.