Reference Manual (complete instructions)

25
Connecting to a Smart Device (SnapBridge)
Connecting the Camera and a Smart Device
• Use a sufficiently charged battery so that the camera does not turn off during the
procedure.
• Insert a memory card with sufficient free space into the camera.
1 Camera: Select Network menu
(A112) M Connect to smart device,
and press the k button.
• The dialog in step 2 is displayed when you turn on
the camera for the first time. This step is
unnecessary in such cases.
2 Camera: Press the k button when the
dialog on the right is displayed.
• A dialog prompting you whether to use the NFC
function is displayed. If you will use the NFC
function, touch the NFC antenna of the smart
device to Y (N-mark) on the camera. When Start
pairing? is displayed on the smart device, tap OK
and proceed to step 6. If you will not use the NFC
function, press the k button.
3 Camera: Confirm that the dialog on the
right is displayed.
• Prepare the smart device and proceed to the next
step.
Connecting the Camera and a Smart Device
Restore default settings
Bluetooth
Wi-Fi
Send while shooting
Connect to smart device
Airplane mode
MENU.
later from the Network menu, press
To skip this screen and set SnapBridge
smart device and share them online.
Use SnapBridge to send photos to your
Set
Later
Next
Cancel
Non-NFC enabled devices: press OK.
the camera to the smart device.
NFC enabled devices: touch
SnapBridge
Cancel
installing, open the SnapBridge app.
store and search for SnapBridge. After
On your smart device, go to the app
Camera
App