Reference Manual (complete instructions)

143
Using the Menu
The Network Menu
Configure the wireless network settings to connect the camera and a smart device.
• Some settings cannot be changed while a wireless connection is established. To
change them, disconnect the wireless connection.
* See “Operating the Text Input Keyboard” (A144) for information on how to enter
alphanumeric characters.
The Network Menu
Press the d button M q menu icon M k button
Option Description
Airplane mode Select On to turn off all wireless connections.
Connect to smart device
Select when using the SnapBridge app to connect the
camera and a smart device (A25).
Send while shooting
Set the conditions for automatically sending images to a
smart device.
• The size of images that are uploaded is restricted to 2
megapixels. To upload still images at their original size,
use Download pictures in the SnapBridge app.
Wi-Fi
Network
settings
SSID*: Change the SSID. Set a 1- to 32-character
alphanumeric SSID.
Auth./encryp.: Select whether or not to encrypt the
communications between the camera and the connected
smart device.
Communications are not encrypted when Open is selected.
Password*: Set the password. Set an 8- to 36-character
alphanumeric password.
Channel: Select the channel used for wireless connections.
Subnet mask: Use the default setting (255.255.255.0)
under normal conditions.
DHCP server IP address: Use the default setting
(192.168.0.10) under normal conditions.
Current settings Display the current settings.
Bluetooth
Connection Select Disable to turn off Bluetooth communication.
Paired devices
Change the smart device to connect with, or delete the
connected smart device.
This camera can be paired with up to five smart devices, but
can connect to only one device at a time.
Send while off
Set whether or not to allow the camera to communicate
with the smart device when the camera is off or in standby
mode (A19).
Restore default settings Restore all network menu settings to their default values.