Installation instructions

Installation instructions en
49
Steaming
Slide the universal pan into the cooking compartment
one level below the perforated steaming tray (sizeXL) if
instructed to do so in the recommended settings table.
Shelf positions
Shelf positions when steaming on 1level:
¡ Use a maximum of 2.5kg.
¡ Perforated steaming tray, sizeXL: Shelf position2
Shelf positions when steaming on 2levels:
¡ Use a maximum of 1.8kg per level.
¡ Perforated steaming tray, sizeXL: Shelf position3
¡ Perforated steaming tray, sizeXL: Shelf position2
Recommended settings for steaming
Food Accessory/cookware Shelf posi-
tion
Heating
function
→Page7
Temperature in °C Cooking time
in mins
Peas, frozen, two containers 2 pcs
Steam containers, XL
size
+
Universal pan
3+2+1 ⁠ 100 -
1, 2
Broccoli, fresh, 300g Steam containers, XL
size
2 ⁠ 100
3
6–7
4
Broccoli, fresh, one con-
tainer
Steam containers, XL
size
2 ⁠ 100
3
6–7
4
1
The test is over when 85 °C is reached at the coldest spot (see IEC 60350-1).
2
The test is over when 85°C is reached at the coldest spot (see IEC 60350-1).
3
Preheat the appliance.
4
A comparable degree of cooking between the reference sample and the main sample is achieved if the reference
sample is cooked for 5 minutes (produced as described in IEC 60350-1).
Recommended settings for grilling
Food Accessory/cookware Shelf posi-
tion
Heating
function
→Page7
Temperature in °C Cooking time
in mins
Toasting bread Wire rack 3 ⁠ 275 3–6
27 Installation instructions
Observe this information when installing the appliance.
27.1 General installation instructions
Follow these instructions before you start with
the installation of the appliance.
¡ The safe operation of this appliance can
only be guaranteed if it has been installed
to a professional standard in accordance
with these installation instructions. The in-
staller shall be liable for damages incurred
as a result of incorrect installation.
¡ Check the appliance for damage after un-
packing it. Do not connect the appliance if
it has been damaged in transit.
¡ Before starting up the appliance, remove
any packaging material and adhesive film
from the cooking compartment and the
door.
¡ Proceed in accordance with the installation
sheets for installing accessories.
¡ Fitted units must be heat-resistant up to
95°C, and adjacent unit fronts up to
70°C.
¡ Do not install the appliance behind a decor-
ative door or the door of a kitchen unit.
There is a risk of overheating.
¡ Cut-out work on the units should be carried
out before installing the appliance. Remove
any shavings. Otherwise, the correct opera-
tion of electrical components may be ad-
versely affected.