OPERATION AND PARTS MANUAL WHISPERWELD™ MODEL SDW-225SS WELDER/GENERATOR (KUBOTA DIESEL ENGINE) PARTS LIST NO. D2845300004A Revision #2 (10/07/05) THISRevision MANUAL#1 MUST ACCOMPANY (07/13/01) THE EQUIPMENT AT ALL TIMES.
SDW-255SS — PROPOSITION 65 WARNING Diesel engine exhaust and some of PAGE 2 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
NOTE PAGE SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
SDW-255SS — TABLE OF CONTENTS Multiquip SDW-225SS Welder/Generator Proposition 65 Warning ............................................. 2 Table Of Contents ..................................................... 4 Parts Ordering Procedures ....................................... 5 Safety Message Alert Symbols .............................. 6-7 Rules For Safe Operation .................................... 8-11 Operation and Safety Decals ............................. 12-13 Specifications ......................
www.multiquip.com Effective: June 1st, 2005 PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Best Deal! Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SDW-225SS — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! HAZARD SYMBOLS Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others.
SDW-225SS — SAFETY MESSAGE ALERT SYMBOLS CAUTION Rotating Parts Hazards NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and clothing away from all moving parts to prevent injury. CAUTION CAUTION Equipment Damage Hazards Other important messages are provided throughout this manual to help prevent damage to your portable generator, other property, or the surrounding environment.
SDW-225SS — RULES FOR SAFE OPERATION DANGER Read this manual! Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the SDW-225SS Welder/Generator: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
SDW-225SS — RULES FOR SAFE OPERATION ■ NEVER leave the welder/generator unattended. Turn off engine when unattended. ■ ALWAYS replace any worn or damaged warning decals. ■ DO NOT place hands or fingers inside welder/generator's engine compartment when engine is running. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.
SDW-225SS — RULES FOR SAFE OPERATION NEVER insert any objects into the output receptacles during operation. This is extremely dangerous. ALWAYS turn-off the generators and place all circuit breakers in the “OFF” position when contact with the output receptacles is required. There exist the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even death! Backfeed to a utility system can cause electrocution and or property damage.
SDW-225SS — RULES FOR SAFE OPERATION ■ ALWAYS use a ventilating fan to remove fumes from the breathing zone an welding area. Emergencies ■ NEVER weld near flammable material. Move flammables at 35 feet (11 meters) away or protect them with flame-proof covers. ■ ALWAYS know the location of the nearest first aid kit. ■ NEVER weld near engine fuel. Engine fuel plus flames or sparks can cause fire or explosion. ■ Welding sparks can cause fires.
SDW-225SS — OPERATION AND SAFETY DECALS Machine Safety Decals The SDW-225SS welder/generator is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. The illustration below shows these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. PAGE 12 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — OPERATION AND SAFETY DECALS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
SDW-225SS — SPECIFICATIONS Table 1. Specifications Generator Specifications Model SDW-225SS Phase Single Phase Wires 3-Wires (Neutral Grounded) Maximun Output 6000 Watts Rated Voltage 120/240 Volts Frequency 60 Hz Speed 3600 r pm Power Factor 1.0 Rating Continuous Welder Specifications Rated Output Power (CV/CC) 4.0 kW/5.
SDW-225SS — GENERAL INFORMATION SDW-225SS FAMILIARIZATION Generator The MQ Power Model SGW-250SS welder/generator can provide 200 amps of welding current when in the CV/DC mode and 225 amps of welding current when in the CC/DC mode. When used as a generator it can provide a maximum of 6,000 watts of AC power.
SDW-225SS — DIMENSIONS Figure 1. SDW-225SS Dimensions PAGE 16 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — CONTROLS AND INDICATORS Figures 2 and 3 show the location of the controls and indicators. The functions of each control or indicator is described below and on the preceding page. 1. Fuel Gauge – Indicates the amount of fuel in the fuel tank. 2. Air Outlet and Exhaust – Allows engine exhaust to exit the generator into the open air. NEVER block this opening. 3. Fuel Cap – Remove this cap to add fuel. Add only #2 diesel fuel. Always keep an adequate amount of fuel in the tank. DO NOT top off.
SDW-225SS — CONTROLS AND INDICATORS 17. Fuel Drain Plug – Remove this plug to drain fuel from the fuel tank. 27. Idle Control Switch – Regulates the engine speed when the generator is under load. 18. Frame Ground Lug – Connect a ground strap between this lug and a ground rod. Make sure that the ground rod is inserted deep into the ground to provide a good earth ground. Consult with local Electrical and Safety Codes for proper connection and depth of ground rod. 28.
SDW-225SS — TRAILER-10 MAINTENANCE The SDW-225SS welder/generator can be mounted on a Trailer-10. Trailer Maintenance This section is intended to provide the user with service and maintenance information for the Trailer-10. Periodic inspection of the trailer will ensure safe towing of the generator and will prevent personal injury and damage to the equipment. The definitions below describe some of the major components of a Trailer-10 that would be used with the SDW-225SS welder/ generator. 1.
SDW-225SS — TRAILER-10 MAINTENANCE Tires/Wheels/Lug Nuts Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched. CAUTION - EYESIGHT HAZARD Suspension The leaf suspension springs and associated components (Figure 4) should be visually inspected every 6,000 miles for signs of excessive wear, elongation of bolt holes, and loosening of fasteners.
SDW-225SS — TRAILER-10 MAINTENANCE Lug Nut Torque Requirements It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows: 1. Start all wheel lug nuts by hand. 2. Torque all lug nuts in sequence (see Figure 5). DO NOT torque the wheel lug nuts all the way down. Tighten each lug nut in 3 separate passes as defined by Table 5. 3.
SDW-225SS — TRAILER-10 MAINTENANCE Figure 6. Trailer/Towing Vehicle Wiring Diagram PAGE 22 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — TRAILER-10 MAINTENANCE Towing Safety Precautions CAUTION Check with your local county or state towing safety regulations before towing your generator. To reduce the possibility of an accident while transporting the generator on public roads, always make sure the trailer (Figure 7) that supports the generator and the towing vehicle are in good operating condition and both units are mechanically sound.
SDW-225SS — WKT225A WHEEL KIT ASSEMBLY The SDW-225SS welder/generator can be mounted on a WKT225A Wheel Kit. . Below are assembly Instructions for the WKT225 Wheek Kit. Tools: ■ Flashlight ■ Ratchet Set with 3/4", 9/16" sockets ■ Adjustable Wrench or 3/4", 9/16", 10mm open end wrenches ■ Lifting Device of adequate capacity 2. Assemble the stationary axle (Figure 9) - Push the roll pin through the inner axle hole. Slide a flat washer onto the axle shaft, then put the wheel on the axle.
SDW-225SS — WKT225A WHEEL KIT ASSEMBLY 4. Insert a lifting strap through the lifting eye on top of the machine and raise the generator/welder off the ground using a lifting device of adequate capacity (Figure 11). The generator/welder can be suspended in air while installing the wheel kit or can be set down on an object which can support the weight of the machine. Ensure the bottom of the cabinet has enough clearance to install the wheel kit. Figure 13.
SDW-225SS — INSTALLATION Outdoor Installation Install the generator in a location where it will not be exposed to rain or sunshine. Make sure that the welder/generator is on secure level ground so that it cannot slide or shift around. Also install the generator in a manner so that the exhaust will not be discharged in the direction of nearby homes. The installation site must be relatively free from moisture and dust. All electrical equipment should be protected from excessive moisture.
SDW-225SS — PRE-SETUP General Inspection Prior to Operation Extension Cable The SDW-225SS utilizes a generator that has been thoroughly inspected and accepted prior to shipment from the factory. However, be sure to check for damaged parts or components, or loose nuts and bolts, which could have occurred in transit. When electric power is to be provided to various tools or loads at some distance from the generator, extension cords are normally used.
SDW-225SS — PRE-SETUP Lubrication Oil Fuel Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill. Make sure the generator is level. With the dipstick inserted all the way, but without being screwED into the filler hole, verify that the oil level is maintained between the two notches (Figure 16) on the dipstick. See Table 3 for proper selection of engine oil. Fill the fuel tank with clean and fresh diesel fuel. Do not fill the tank beyond capacity.
SDW-225SS — PRE-SETUP CAUTI CAUTION When adding coolant or anti-freeze to the radiator, do not remove the radiator cap until the unit has completely cooled. Day-to-day addition of coolant or anti-freeze is done from the reserve tank. See Table 8. for engine, radiator and reserve tank coolant capacities. Make sure that the coolant level in the reserve tank is always between the "H" and the "L" markings. Table 8. Coolant Capacity Engine and Radiator 0.66 Gal. Reserve Tank 0.27 Gal.
SDW-225SS — INSTRUMENTATION CAUTI CAUTION When using a combination of dual receptacles, total load should not exceed the rated capacity of the generator set. Power Outlets The generator has the following single-phase 60 Hz, 120/ 240 volt receptacles.
SDW-225SS — LOAD APPLICATION Single Phase Load Always be sure to check the nameplate on the generator and equipment to insure the wattage, amperage and frequency requirements are satisfactorily supplied by the generator for operating the equipment. Generally, the wattage listed on the nameplate of the equipment is its rated output. Equipment may require 130-150% more wattage than the rating on the nameplate, as the wattage is influenced by the efficiency, power factor and starting system of the equipment.
SDW-225SS— WELDER OPERATING INSTRUCTIONS Welding Cables Connect the welding cables (Figure 18) to the welder's output terminals located on the control panel. The output terminals have (+) and (-) polarities. Select the appropriate polarities according to the application (see Table 11). NOTE ALWAYS attach terminal connectors at the end of each cable. NEVER connect exposed or frayed wires (Figure 19) directly to the terminals. Exposed wiring may cause shocks or di-electric breakdown from poor contact.
SDW-225SS— WELDER OPERATING INSTRUCTIONS CAUTI CAUTION NOTE NEVER switch the CV/CC Selector Switch during any welding operation. When switching a selector switch, fully rotate it to the right or left position. 1. Turn the CV/CC Selector Switch (Figure 21) to the CV position, and adjust voltage using the Voltage Control knob. When the CV/CC Selector Switch is in the CC position, the Voltage Control function is inoperative. 3. Set the CC Current Range Selector Switch to the desired position (Low/High). 4.
SDW-225SS— WELDER OPERATING INSTRUCTIONS Welding and Auxiliary Outputs. Quality Welding Check Points The welding and auxiliary outputs can be used simultaneously, subject to all of the following conditions: Adherence to the following rules will ensure quality welds. ■ Use only high-quality welding machines, electrodes and welding accessories. ■ Know the base material you are working on. ■ Select the proper welding process to give the highest quality welds on the base material to be used.
SDW-225SS— WELDER OPERATING INSTRUCTIONS Welding Helmet Lens Shade Number The shade number pertains to the lightness or darkness of the lens in the welding helmet. Lens number range from 2 to 14 where 2 would be the lightest lens and 14 would be the darkest lens. See Table 13 for the correct shade number for different types of welding. Table 13.
SDW-225SS — ENGINE OPERATING INSTRUCTIONS WARNING The engine's exhaust contains harmful emissions. ALWAYS ventilate the exhaust when operating inside tunnels, excavations or buildings. Direct exhaust away from nearby personnel. Before Starting 1. Be sure to disconnect the electrical load and switch the main circuit breaker to the “OFF” position prior to starting the engine. 2. Never start the engine with the main circuit breaker “ON”. 3. Check the engine oil level prior to starting the engine.
SDW-225SS — MAINTENANCE General Inspection At least daily or prior to each use, the generator should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners. Check for fuel or oil leaks. Also check the radiator coolant level. Engine Side: For a more detail engine maintenance schedule refer to the KUBOTA Engine Shop and Operator's Manuals. Air Cleaner Every 100 hours: The air cleaner employed on the KUBOTA engine Model Z482-E is a dry type.
SDW-225SS — PREPARATION FOR LONG - TERM STORAGE Generator Storage For storage of the generator for over 30 days, the following is required: z Drain the fuel tank completely. z Run the engine until all the diesel fuel is completely consumed. z Completely drain the oil from the crankcase and refill with fresh oil. z Disconnect the negative battery cable from the battery. z Clean all external parts of the generator with a cloth. z Cover the welder/generator and store in a clean, dry place.
SDW-225SS —GENERATOR WIRING DIAGRAM Generator Wiring Diagram SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
SDW-225SS — ENGINE WIRING DIAGRAM Engine Wiring Diagram PAGE 40 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — TROUBLESHOOTING (WELDER) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Welder Troubleshooting (Table 13) information shown below . If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 14.
SDW-225SS — TROUBLESHOOTING (ENGINE & GENERATOR) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine and Generator Troubleshooting (Table 14) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 15.
SDW-225SS — TROUBLESHOOTING (ENGINE & GENERATOR) TABLE 15. ENGINE & GENERATOR TROUBLESHOOTING (CONTINUED) SYMPTOM Engine star ts and "Idle Control Switch" is in OFF position. Engine speed rises and engine has large vibrations. overload. Engine star ts and "Idle Control Switch" is in OFF position. Engine speed rises and engine has abnormal noise. Engine star ts and "Idle Control Switch" is in OFF position. Engine speed rises and remains at high speed when Idle Control switch is placed in the ON position.
SDW-225SS — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 15) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 16.
SDW-225SS — TROUBLESHOOTING (ENGINE) TABLE 16. ENGINE & GENERATOR TROUBLESHOOTING (CONTINUED) SYMPTOM Engine star ts and "Idle Control Switch" is in OFF position. Engine speed rises and engine has large vibrations. overload. Engine star ts and "Idle Control Switch" is in OFF position. Engine speed rises and engine has abnormal noise. Engine star ts and "Idle Control Switch" is in OFF position. Engine speed rises and remains at high speed when Idle Control switch is placed in the ON position.
SDW-225SS — EXPLANATION OF PARTS SECTION REMARKS The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice . Multiquip does not guarantee the availability of the parts listed. Sample Parts List: NO.
SDW-225SS — SUGGESTED SPARE PARTS SDW-225SS W/KUBOTA Z482-EB DIESEL ENGINE 1 TO 3 UNITS Qty. P/N Description 5 ............ 7000011221 .......... AIR FILTER 5 ............ 1523143560 .......... FUEL FILTER 5 ............ 7000015241 .......... OIL FILTER 2 ............ 1980572531 .......... FAN BELT 1 ............ 3741059110 .......... STARTER SWITCH 5 ............ 3741055150 .......... IGNITION KEY 2 ............ 1584139010 .......... OIL SENDING UNIT 1 ............ D2312500103 .......
SDW-225SS — GENERATOR ASSY. GENERATOR ASSY. PAGE 48 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — GENERATOR ASSY. GENERATOR ASSY.
SDW-225SS — CONTROL PANEL ASSY. CONTROL PANEL ASSY. PAGE 50 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — CONTROL PANEL ASSY. CONTROL PANEL ASSY.
SDW-225SS — ELECTRIC PARTS ASSY. ELECTRIC PARTS ASSY. PAGE 52 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — ELECTRIC PARTS ASSY. ELECTRIC PARTS ASSY.
SDW-225SS — ENGINE & RADIATOR ASSY. ENGINE & RADIATOR ASSY. PAGE 54 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — ENGINE & RADIATOR ASSY. ENGINE & RADIATOR ASSY.
SDW-225SS — BATTERY ASSY. BATTERY ASSY. PAGE 56 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — BATTERY ASSY. BATTERY ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 0167103820 1702202104 D2345200004 0805082704 0037806000 0040006000 0041206000 BATTERY ....................................... 1 ........... 38B20R BATTERY SHEET 1 BATTERY BAND 1 BATTERY BOLT 2 WING NUT 2 SPRING WASHER 2 PLAIN WASHER 2 BATTERY CABLE .......................... 1 ........... MAKE LOCALLY BATTERY CABLE .......................... 1 ........... MAKE LOCALLY TERMINAL ASSY. .......................... 1 ....
SDW-225SS — MUFFLER ASSY. MUFFLER ASSY. PAGE 58 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — MUFFLER ASSY. MUFFLER ASSY. NO PART NO PART NAME 1 2 3 4 5 6 7 D2332100003 0016908020 D2335000003 1526312371 1502336004 0207008000 0016908035 MUFFLER HEX. HEAD BOLT EXHAUST PIPE GASKET GASKET HEX. NUT HEX. HEAD BOLT QTY. 1 4 1 1 1 4 2 REMARKS REPALCES 0602320153 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
SDW-225SS — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 60 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — FUEL TANK ASSY. FUEL TANK ASSY. NO PART NO PART NAME 1 D2365000013 0810105800 0810105900 0602125033 D2365200004 0805003414 0016906006 0207308000 D1490600104 1615511204 7812014003 0802011104 0150000018 0016906016 0199900670 060 5515094 1553143012 1523143560 D2368700004 0016906016 0016908065 0966180240 0966180400 0966140360 1491142751 1497142751 FUEL TANK 1 CAP, FUEL TANK 1 FUEL FILTER 1 FUEL GAUGE ................................ 1 ........... CJ-39A TANK BAND 2 PAD, TANK BANK 4 HEX.
SDW-225SS — ENCLOSURE ASSY. ENCLOSURE ASSY PAGE 62 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — ENCLOSURE ASSY. ENCLOSURE ASSY.
SDW-225SS — ENCLOSURE (RUBBER SEALS) ENCLOSURE (RUBBER SEALS) PAGE 64 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — ENCLOSURE (RUBBER SEALS) ENCLOSURE (RUBBER SEALS) NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 0029400470 0229400760 0222900325 0222900125 0222600100 0228300600 0228300200 0228300550 0227600130 0227600500 RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL RUBBER SEAL QTY. REMARKS 4 2 2 4 4 1 2 2 2 2 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
SDW-225SS — NAMEPLATE AND DECALS NAMEPLATE AND DECALS PAGE 66 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
SDW-225SS — NAMEPLATE AND DECALS NAMEPLATE AND DECALS NO PART NO PART NAME 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 0800628504 0800690804 1630645004 1630647004 1630610404 1630680104 1630680004 1630610504 0600689404 0800689504 6390671104 7810680104 7810680204 7670624004 8700611603 8700611804 8700611904 D2552000003 D9512100203 0820610404 0820650604 8700611524 8700625504 8740631002 8740631202 D2562200004 D2562200104 D9522001004 Decal: Ground ...........................
KUBOTA Z482-EB ENGINE — CRANKCASE ASSY. CRANKCASE ASSY. PAGE 68 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — CRANKCASE ASSY. CRANKCASE ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 190 200 210 220 1685101012 1685196260 1685196270 1545196270 1526196010 1552106030 1552196030 1526196160 0501200508 0501200814 1522133650 1523133960 1733159190 1685116212 1522133700 1584773130 1685135010 1685135152 1584191050 1584135660 0571200408 0278350100 COMP. CRANKCASE .......................... 1 .........
KUBOTA Z482-EB ENGINE — OIL PAN ASSY. OIL PAN ASSY. PAGE 70 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — OIL PAN ASSY. OIL PAN ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 1756101500 0112360814 0102350612 1654133750 1545196670 1685132110 0481400160 COMP. OIL PAN BOLT BOLT PLUG, DRAIN GASKET FILTER, OIL 0 RING QTY. REMARKS 1 1 14 1 1 1 1 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 72 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100 1522101750 0112360816 1685503042 1532196260 1526196010 1584113540 1584113560 1584196020 1460103450 1685103310 HOOK, ENGINE 2 BOLT 2 COMP. CYLINDER HEAD ............... 1 ....... INCLUDES ITEMS W/ CAP, SEALING 1 PLUG 1 GUIDE, INLET VALVE 2 GUIDE, EXHAUST VALVE 2 PLUG 1 BOLT, CYLINDER HEAD 10 GASKET, CYLINDER HEAD 1 * * * * QTY.
KUBOTA Z482-EB ENGINE — GEAR CASE ASSY. GEAR CASE ASSY. PAGE 74 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — GEAR CASE ASSY. GEAR CASE ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100 110 120 130 150 160 170 180 190 200 210 220 230 240 1687504024 1685196010 1584156280 04814061300 1586204132 0102350618 0102360650 1584191010 0102350670 0102350675 1524132290 1584194010 1587704140 1685136950 1584136930 0771503211 1584633110 1381133140 0481106230 1946188132 1522188210 0205650060 0451260060 COMP. CASE, GEAR ........................... 1 ........
KUBOTA Z482-EB ENGINE — HEAD COVER ASSY. HEAD COVER ASSY. PAGE 76 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — HEAD COVER ASSY. HEAD COVER ASSY.
KUBOTA Z482-EB ENGINE — OIL FILTER ASSY. OIL FILTER ASSY. PAGE 78 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — OIL FILTER ASSY. OIL FILTER ASSY. NO PART NO PART NAME QTY. 010 1585399170 CARTRIDGE, OIL FILTER 1 REMARKS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — DIPSTICK & GUIDE ASSY. DIPSTICK & GUIDE ASSY. PAGE 80 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — DIPSTICK & GUIDE ASSY. DIPSTICK & GUIDE ASSY. NO PART NO PART NAME QTY. 010 1685136410 GAUGE, OIL 1 REMARKS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — MAIN BEARING CASE ASSY. MAIN BEARING CASE ASSY. PAGE 82 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — MAIN BEARING CASE ASSY. MAIN BEARING CASE ASSY. NO PART NO PART NAME 010 020 030 035 040% 050% 060 070 080 090 100 110 1685104092 1584104540 1585204360 1584104800 1584104810 1921599160 1584104822 0102350620 0102350622 1685104040 1584104540 1584104562 ASSY. CASE, MAIN BEARING 1 BOLT, BEARING CASE 2 GASKET, BEARING CASE 1 ASSY. COVER, BRG CASE ........................... 1 ................... INCLUDES ITEMS W/% COVER, BEARING CASE 1 SEAL, OIL 1 GASKET 1 BOLT 8 BOLT 8 ASSY.
KUBOTA Z482-EB ENGINE — CAMSHAFT & IDLE GEAR ASSY. CAMSHAFT & IDLE GEAR SHAFT ASSY. PAGE 84 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — CAMSHAFT & IDLE GEAR ASSY. CAMSHAFT & IDLE GEAR SHAFT ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100# 120 130 140 150 1685115550 1685115110 1584116015 1552193610 1686416510 0571200518 1584116270 0102350612 1587524013 1587524282 1587524370 1587524320 1587524250 0102350614 TAPPET 4 PUSH ROD 4 ASSY. CAMSHAFT .......................... 1 ............ INCLUDES ITEMS W/ SCREW, SET 1 GEAR, CAM 1 KEY, FEATHER 1 STOPPER, CAMSHAFT 1 BOLT 2 COMP. GEAR, IDLE ............
KUBOTA Z482-EB ENGINE — PISTON & CRANKSHAFT ASSY. PISTON & CRANKSHAFT ASSY. PAGE 86 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — PISTON & CRANKSHAFT ASSY. PISTON & CRANKSHAFT ASSY.
KUBOTA Z482-EB ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 88 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO PART NO PART NAME 010 020# 030 050 060 070 080 090 1685125010 1685163820 1585225160 1584704612 0112350820 3122014170 0112360814 0401360080 COMP. FLYWHEEL ........................ 1 .............. INCLUDES ITEMS W/# GEAR, RING 1 BOLT, FLYWHEEL 5 HOUSING, FLYWHEEL 1 BOLT 10 COVER 1 BOLT 1 WASHER, PLAIN 1 QTY. REMARKS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FUEL CAMSHAFT & GOV. SHAFT ASSY. FUEL CAMSHAFT & GOVERNOR SHAFT ASSY. PAGE 90 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FUEL CAMSHAFT & GOV. SHAFT ASSY. FUEL CAMSHAFT & GOVERNOR SHAFT ASSY. NO PART NO PART NAME 010 020# 030# 040# 050# 060# 070# 080# 090# 100# 110 120 130 140 1685116020 1584116172 0815306203 1685151150 0571200515 1584155450 1584155690 0771500801 1526155470 0771503217 0810306203 0461200170 1584116320 0102350612 ASSY. CAMSHAFT, FUEL ...................1 ............
KUBOTA Z482-EB ENGINE — ENGINE STOP LEVER ASSY. ENGINE STOP LEVER ASSY. PAGE 92 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — ENGINE STOP LEVER ASSY. ENGINE STOP LEVER ASSY. NO PART NO PART NAME 010 020# 030# 040# 050# 060 070 080 090 100 110 1584154092 1584154100 1526192020 1584154220 1502133660 1584154270 1584154122 1G03154210 156019665 1584192330 1G02154290 ASSY. APPARATUS, IDLE ............... 1 ............ INCLUDES ITEMS W/# ASSY. BOLT, ADJUSTING 1 NUT 1 NUT, CAP 1 GASKET 2 CAP 1 BOLT, ADJUSTING 1 NUT, LOCK 1 GASKET 2 NUT, CAP 1 PIPE, LOCK 1 QTY.
KUBOTA Z482-EB ENGINE — STOP SOLENOID ASSY. STOP SOLENOID ASSY. PAGE 94 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — STOP SOLENOID ASSY. STOP SOLENOID ASSY. NO PART NO PART NAME 010 020 1685160010 0175450612 SOLENOID, STOP BOLT, FLANGE QTY. REMARKS 1 2 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — INJECTION PUMP 1 ASSY. INJECTION PUMP 1 ASSY. PAGE 96 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — INJECTION PUMP 1 ASSY. INJECTION PUMP 1 ASSY. NO PART NO PART NAME 010 020 020 020 030 040 050 060 070 080 090# 100# 1600151010 1600152090 1600152110 1600152120 0131110620 1584191500 1584192320 0451260060 1584195680 1526342010 1491142750 6659154250 ASSY PUMP, INJECTION 1 SHIM, INJECTION PUMP 1 SHIM, INJECTION PUMP 1 SHIM, INJECTION PUMP 1 BOLT, HEX-SOC-HD 3 STUD 1 NUT, CAP 1 WASHER, SPRING 4 JOINT, EYE 1 ASSY. PIPE, FUEL ........................... 1 .............
KUBOTA Z482-EB ENGINE — INJECTION PUMP 2 ASSY. INJECTION PUMP 2 ASSY. PAGE 98 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z 482-EB ENGINE—INJECTION PUMP ASSY. 2 INJECTION PUMP ASSY.
KUBOTA Z482-EB ENGINE — SPEED CONTROL PLATE ASSY. SPEED CONTROL PLATE ASSY. PAGE 100 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — SPEED CONTROL PLATE ASSY. SPEED CONTROL PLATE ASSY.
KUBOTA Z482-EB ENGINE — NOZZLE HOLDER & GLOW ASSY. NOZZLE HOLDER & GLOW PLUG ASSY. PAGE 102 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — NOZZLE HOLDER & GLOW ASSY. NOZZLE HOLDER & GLOW PLUG ASSY. NO PART NO PART NAME 010 020 030# 040 050 060 070 075 090 100 110 120 130 140 150 160 170 1585242502 1584142500 1497142750 1584151360 1560196650 1600153000 1584153622 1907753650 1685153712 1685153722 1584153850 1584153860 0302450520 1685165510 1685165560 0276150040 0401360040 ASSY. PIPE, OVER FLOW 1 ASSY. PIPE, OVER FLOW ................. 1 .......... INCLUDES ITEMS W/# CLIP, PIPE 2 SCREW, AIR BREATHER 1 GASKET 1 ASSY.
KUBOTA Z482-EB ENGINE — NOZZLE HOLDER ASSY. NOZZLE HOLDER ASSY. PAGE 104 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — NOZZLE HOLDER ASSY. NOZZLE HOLDER ASSY.
KUBOTA Z482-EB ENGINE — FORK LEVER ASSY. FORK LEVER ASSY PAGE 106 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FORK LEVER ASSY. FORK LEVER ASSY NO PART NO PART NAME 010 020 030 040# 050# 060#% 070#% 080#% 090# 100# 110# 120 1685156480 1946156410 1600056050 1600056040 1584156060 1584156130 1584156150 0541100318 1526166410 0451260050 1584156230 0102350635 SPRING, START 1 SPRING, OGVERNOR 1 ASSY. LEVER, FORK ....................... 1 ............ INCLUDES ITEMS/# COMP. LEVER, FORK 1 ASSY. LEVER, FORK ....................... 1 ............
KUBOTA Z482-EB ENGINE — FUEL FILTER ASSY. FUEL FILTER ASSY. PAGE 108 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FUEL FILTER ASSY. FUEL FILTER ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100 110 120 130 1553143010 1553143110 1430143522 1430143820 1430143830 1430143840 1539343100 1539343580 1687388430 1430143590 1430143650 1523143560 1430143570 FILTER, FUEL ASSY ............... 1 COMP. BODY, COCK ................ 1 LEVER, COCK 1 SPRING, VALVE 1 SCREW, SET 1 O RING, LEVER 1 ASSY CUP, FILTER ..................
KUBOTA Z482-EB ENGINE—FUEL PUMP ASSY. FUEL PUMP ASSY. PAGE 110 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FUEL PUMP ASSY. FUEL PUMP ASSY. NO PART NO PART NAME 010 020 030 1582152030 1626452140 0102350616 ASSY. PUMP, FUEL GASKET, FUEL PUMP BOLT QTY. REMARKS 1 1 2 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — DYNAMO & PULLEY ASSY. DYNAMO & PULLEY ASSY. PAGE 112 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — DYNAMO & PULLEY ASSY. DYNAMO & PULLEY ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 130 140 150 1753164010 1259964420 0112350830 0115350855 0401360080 0211450080 0451260080 0401560080 0102350616 1685174280 1588191030 1980572530 ASSY. DYNAMO 1 STAY, DYNAMO 1 BOLT 1 BOLT 1 WASHER, PLAIN 2 NUT 1 WASHER, SPRING 1 WASHER, PLAIN 1 BOLT 2 PULLEY, FAN DRIVE 1 BOLT 1 BELT, FAN ......................................... 1 .......... 34.5 IN QTY.
KUBOTA Z482-EB ENGINE — DYNAMO ASSY. DYNAMO ASSY. PAGE 114 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — DYNAMO ASSY. DYNAMO ASSY. NO PART NO PART NAME 010 020% 030%# 040%# 050%# 060%# 070%# 080% 090% 100% 110% 120% 130% 140% 150% 160% 170% 180% 1753164010 1553164122 1553164110 1553164040 6C04082860 1553174180 1553174140 1553164363 1526193010 1553164292 1553164072 1553174180 1553193010 1553164190 1526164150 1526192030 1526194070 1526194020 ASSY. DYNAMO ............................. 1 .............. INCLUDES ITEMS W/% COMP. FLYWHEEL ........................ 1 ..............
KUBOTA Z482-EB ENGINE — STARTER 1 ASSY. STARTER 1 ASSY. PAGE 116 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — STARTER 1 ASSY. STARTER 1 ASSY. NO PART NO PART NAME QTY. 010 020 1983763010 0112350825 ASSY. STARTER BOLT 1 2 REMARKS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — STARTER 2 ASSY. STARTER 2 ASSY. PAGE 118 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — STARTER 2 ASSY. STARTER 2 ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100 110 120 130 140 150 160 170 180 1983763010 1983763050 1585263020 1983763030 1585263240 1983763150 1983763040 1983763320 1983763070 1585263410 1983763080 1585263360 1585263380 1585263390 1585263370 1983763200 1585263250 1585293310 ASSY. STARTER .............................. 1 ............ INCLUDES ITEMS W/ LEVER, DRIVE 1 SWITCH, MAGNETIC 1 FRAME, DRIVE END ....................... 1 .....
KUBOTA Z 482-EB ENGINE — OIL SWITCH ASSY. OIL SWITCH ASSY. PAGE 120 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z 482-EB ENGINE — OIL SWITCH ASSY. OIL SWITCH ASSY. NO PART NO PART NAME QTY. 010 1584139010 SWITCH, OIL 1 REMARKS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — WATER FLANGE & THERMOSTAT ASSY. WATER FLANGE & THERMOSTAT ASSY. PAGE 122 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — WATER FLANGE & THERMOSTAT ASSY. WATER FLANGE & THERMOSTAT ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 100 110 120 1687572700 1624173370 1584172922 0102350616 0102360650 1685173350 1624173360 1553173010 1584173260 1685173270 0102350622 1554383040 COMP. FLANGE, WATER 1 PIPE, WATER RETURN .................... 1 ........... NCLUDES ITEMS W/ GASKET, WATER FLANGE 1 I BOLT 2 BOLT 4 PIPE, WATER RETURN 1 BAND, PIPE 2 ASSY.
KUBOTA Z482-EB ENGINE — WATER PUMP ASSY. WATER PUMP ASSY. PAGE 124 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — WATER PUMP ASSY. WATER PUMP ASSY. NO PART NO PART NAME 010 020 030 040 050 060 070 080 090 1988373030 1585273520 1585273550 1548173050 1988373510 1585273340 1588173432 0102350622 0102350638 ASSY. PUMP, WATER ....................... 1 ........... INCLUDES ITEMS W/ FLANGE, WATER PUMP 1 BEARING 1 ASSY. SEAL, MECHANICAL 1 IMPELLER, WATER PUMP 1 PIPE, WATER RETURN 1 GASKET, WATER PUMP NA 1 BOLT 4 BOLT 1 * * * * * QTY.
KUBOTA Z482-EB ENGINE — WATER PIPE ASSY. WATER PIPE ASSY. PAGE 126 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — WATER PIPE ASSY. WATER PIPE ASSY. NO PART NO PART NAME 010 020 030 040 050 1584172860 1588172870 1584191510 0275150060 0931889030 PIPE, WATER PIPE, WATER STUD NUT, FLANGE CLAMP, HOSE QTY. REMARKS 1 1 1 1 2 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FAN ASSY. FAN ASSY. PAGE 128 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — FAN ASSY. FAN ASSY. NO PART NO PART NAME 010 020 030 1586774112 1584174250 0175450610 FAN PULLEY, FAN BOLT, FLANGE QTY. REMARKS 1 1 4 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — VALVE & ROCKER ARM ASSY. VALVE & ROCKER ARM ASSY. PAGE 130 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — VALVE & ROCKER ARM ASSY. VALVE & ROCKER ARM ASSY.
KUBOTA Z482-EB ENGINE — INLET MANIFOLD ASSY. INLET MANIFOLD ASSY. PAGE 132 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — INLET MANIFOLD ASSY. INLET MANIFOLD ASSY. NO PART NO PART NAME 010 020 030 040 1584111770 1584111820 0102350618 0102350645 ASSY. MANIFOLD, INLET ................. 1 ........... INCLUDES ITEMS W/ GASKET, IN-MANIFOLD 1 BOLT 2 BOLT 1 * QTY. REMARKS * SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — EXHAUST MANIFOLD ASSY. EXHAUST MANIFOLD ASSY. PAGE 134 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — EXHAUST MANIFOLD ASSY. EXHAUST MANIFOLD ASSY. NO PART NO PART NAME QTY. 010 020 030 040 050 060 070 1584112313 1584112360 0175950616 0151350618 0275650060 0151350822 1526312370 MANIFOLD, EXHAUST GASKET BOLT, UBS STUD NUT, UBS STUD GASKET, MUFFLER 1 1 2 2 2 4 1 REMARKS SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — GLOW PLUG/GLOW LAMP & TIMER ASSY. GLOW PLUG/GLOW LAMP & TIMER ASSY. PAGE 136 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — GLOW PLUG/GLOW LAMP & TIMER ASSY. GLOW PLUG/GLOW LAMP & TIMER ASSY. NO PART NO PART NAME 010 1569465990 TIMER, GLOW LAMP QTY. REMARKS 1 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — STARTER SWITCH ASSY. STARTER SWITCH ASSY. PAGE 138 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
KUBOTA Z482-EB ENGINE — STARTER SWITCH ASSY. STARTER SWITCH ASSY. NO PART NO PART NAME QTY. REMARKS 010 020% 030% 040% 3741059110 3741055180 6641655170 3741055150 ASSY. SWITCH, STARTER .......... 1 ......... INCLUDES ITEMS W/% CAP, STARTER SWITCH 1 WASHER 1 KEY, STARTER 1 SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
TRAILER-10 ASSY. TRAILER-10 ASSY. PAGE 140 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
TRAILER-10 ASSY. TRAILER-10 ASSY. NO PART NO PART NAME QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 0205 10019 10133 19103 2548 4001 5065 60101 9315 9500 19102 9502 9503 9504 9505 9506 9508 9509 9510 9512 9514 1U1304 SCREW, HHC 3/8-16 x 1 NUT, NYLOC 10-32 NUT, NYLOC 3/8-16 REFLECTOR, AMBER STICK-ON CLAMP, CABLE WASHER, FLAT, 3/8 PLTD STD.
WKT225A WHEEL KIT ASSY. PAGE 142 —SDW-225SS WELDER/GENERATOR— OPERATION & PARTS MANUAL — REV.
WKT225A WHEEL KIT ASSY. WKT225A WHEEL KIT ASSY.
Effective: October 1, 2002 PAYMENT TERMS TERMS AND CONDITIONS OF SALE — PARTS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Terms of payment for parts are net 10 days. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice. All shipments are F.O.B. point of origin.
NOTE PAGE SDW-225SS WELDER/GENERATOR — OPERATION & PARTS MANUAL — REV.
OPERATION & PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Tel. (800) 421-1244 Carson, CA 90746 Fax (800) 537-3927 Contact: mq@multiquip.com Mayco Parts 800-306-2926 Fax: 800-672-7877 310-537-3700 Fax: 310-637-3284 Service Department 800-421-1244 Fax: 310-537-4259 310-537-3700 MQ Parts Department 800-427-1244 310-537-3700 MEXICO UNITED KINGDOM MQ Cipsa Carr. Fed. Mexico-Puebla KM 126.
