Quick Specs

ManualsBrandsMonogram ManualsWall HoodsMonogram 36" Stainless Steel Professional Wall Hood

ZV36SSJSS – Monogram 36" Stainless Steel Professional Hood

Specification Revised 1/16

Dimensions and Specifications (in inches)

35 15/16"

12"

18"

35 15/16"25"

For answers to your Monogram,

GE Profile

™

Series or GE

Series appliance questions, visit

our website at GEAppliances.com or call

GE Answer Center

service, 800.626.2000.

Listed by

Underwriters

Laboratories

Soffit Installation

Soffit

Soffit Installation

30" min

36" max

In this installation, the ductwork running from the top of the

hood will be concealed in the soffit or upper cabinetry.

Wall Mount Installation

30" min

36" max

For this installation, a decorative duct cover is available to conceal

the ductwork running from the top of the hood. Use of the duct cover

requires special consideration to the installation height above the

countertop.

Installation Clearances

These vent hoods are designed to be installed onto a wall

or beneath a soffit or cabinet.

• Install these hoods* 30" min. to 36" max. above the

cooking surface.

* These hoods may be installed 24" min. above a gas or

electric drop-in style cooktop. Always observe the 30" to

36" clearance when installed over any professional style

cooktop or range.

Note: Clearances may vary due to type of cooking product

and local codes. Check with local inspectors to be sure

standard is applicable.

Summary of content (4 pages)

PAGE 1
ZV36SSJSS – Monogram 36" Stainless Steel Professional Hood Dimensions and Specifications (in inches) 35 15/16" 12" 18" 25" 35 15/16" Installation Clearances These vent hoods are designed to be installed onto a wall or beneath a soffit or cabinet. • Install these hoods* 30" min. to 36" max. above the cooking surface. Note: Clearances may vary due to type of cooking product and local codes. Check with local inspectors to be sure standard is applicable. * These hoods may be installed 24" min.
PAGE 2
ZV36SSJSS – Monogram 36" Stainless Steel Professional Hood Advanced Planning POWER SUPPLY • These vent hoods are equipped for 10" round ductwork. In most instances they may be transitioned to 8" round. • This hood may be vented vertically through upper cabinets, soffit or ceiling. A duct transition piece is supplied for vertical exhaust. Use locally supplied elbows to vent horizontally through the rear wall. • Determine the exact location of the vent hood.
PAGE 3
ZV36SSJSS – Monogram 36" Stainless Steel Professional Hood Using Duct Cover Accessories We recommend that the vent hood and decorative duct cover (if used) be on site before final framing and wall finishing. This will help to accurately locate studs, ductwork and electrical service. • Read these examples carefully to determine the need for one or more 6" or 12" duct covers. To avoid unsightly gaps, plan the hood installation height for duct cover use.
PAGE 4
ZV36SSJSS – Monogram 36" Stainless Steel Professional Hood Features and Benefits • 510 CFM Vertical Exhaust • Variable Speed Fan Control • 2 Halogen Lamps with 4 Lighting Levels • Infrared Warming Lamp • Utensil Rod • Removable Grease Trays • Removable Baffle Stainless Steel Filters • Model ZV36SSJSS – Stainless steel Specification Revised 1/16