Datasheet

 2011 Microchip Technology Inc. Preliminary DS41576B-page 175
PIC12F752/HV752
20.7 DC Characteristics: PIC12HV752-E (Extended)
DC CHARACTERISTICS
Standard Operating Conditions (unless otherwise stated)
Operating temperature -40°C  T
A  +125°C for extended
Param
No.
Device Characteristics Min Typ† Max Units
Conditions
VDD Note
D020E Power-down Base
Current (IPD)
(2,3)
PIC12HV752
—135TBDA 2.0 WDT, BOR, Comparator, DAC and
FVR disabled
—210TBDA3.0
—260TBDA4.5
D021E — 135 TBD A 2.0 WDT Current
(1)
—210TBDA3.0
—265TBDA4.5
D022E — 215 TBD A 3.0 BOR Current
(1)
—265TBDA4.5
D023E — 185 TBD A 2.0 CxSP = 1, Comparator Current
(1)
,
single comparator enabled
—265TBDA3.0
—320TBDA4.5
D024E — 90 TBD A 2.0 CxSP = 0, Comparator Current
(1)
,
single comparator enabled
—107TBDA3.0
—127TBDA4.5
D025E — 210 TBD A 3.0 A/D Current
(1)
, no conversion in
progress
—260TBDA4.5
D026E — 215 TBD A 3.0 DAC Current
(1)
—265TBDA4.5
D027E — 485 TBD A 3.0 FVR Current
(1)
, FVRBUFEN = 1,
REFOUT buffer enabled
—615TBDA4.5
Legend: TBD = To Be Determined
* These parameters are characterized but not tested.
† Data in “Typ” column is at 4.5V, 25°C unless otherwise stated. These parameters are for design guidance
only and are not tested.
Note 1: The peripheral current is the sum of the base I
DD or IPD and the additional current consumed when this
peripheral is enabled. The peripheral  current can be determined by subtracting the base I
DD or IPD
current from this limit. Max values should be used when calculating total current consumption.
2: The power-down current in Sleep mode does not depend on the oscillator type. Power-down current is
measured with the part in Sleep mode, with all I/O pins in high-impedance state and tied to V
DD.
3: Shunt regulator is always on and always draws operating current.