Camera Flash User Manual

ter will blink as a warning. Flash operation with

secondary reflector (40 MZ-3 / -3i, 50 MZ-5,

54 MZ-... and 70 MZ-5) is not possible! The

shutter speed must not be faster than 1/60 s!

Master flash units

The flash units mecablitz 40 MZ-..., 54 MZ-..., 70

MZ-... and 76 MZ-5 digi permit cordless flash con-

trol in the “Metz Remote Flash Mode” as a master

flash unit. For the setting instructions for this

“controller mode” please refer to the manual of

the given flash unit.

Slave flash units

The flash units 28 CS-2 digital, 34 CS-2, 34 CS-2

digital, 40 MZ..., 44 MZ-2, 45 CL-4 digi, 50

MZ..., 54 MZ-... , 70 MZ-... and 76 MZ-5 digi per-

mit cordless flash control as a slave unit by the

“Metz remote flash mode”. The flash units 40

MZ-..., 44 MZ-..., 45 CL-4 digi, 54 MZ-... and 70

MZ-4 require the SCA 3083 digital slave adapter

for this purpose. The handle-mount flash units

mecablitz 50 MZ-5 , 70 MZ-... and 76 MZ-5 digi

can be used without slave adapter.

The slave units must operate in TTL flash

mode for the Metz Auto Remote Mode so that

they can be controlled by the master flash

unit. For further details relating to slave mode

please refer to the operating instructions for

the given flash unit or the SCA 3083 digital

slave adapter manual.

6. Slave flash mode

Slave flash mode is not supported by the digi-

tal cameras E-1 and E-300.

☞