Camera Flash User Manual

Settings on the flash unit
• Set on the flash unit the flash mode TTL or EM
(EM = EASY-MODE-TTL; only with 40 MZ... and
50 MZ-5).
Settings on the SCA adapter
The position of switch is irrelevant.
• Set switch in position NORM.
4.2 Flash readiness indication on the camera
The flash ready symbol lights up on the flash
unit when the flash capacitor is charged, thereby
indicating that flash readiness is established and
that a flash can be fired for the next shot. Flash
readiness is also transmitted to the camera for a
corresponding information on the display or in the
viewfinder (see camera manual).
If a picture is shot before flash readiness is indi-
cated then the flash unit will not be triggered so
that the exposure may be incorrect.
Orange LED or flash symbol flashes in the camera
viewfinder
Command to switch on or use the flash unit.
Wait for flash readiness to be indicated when the
flash unit is switched on.
Orange LED or flash symbol is illumina
ted
The flash unit is ready for firing.
Depending on the type of camera used the
indications given on the camera may differ
from the above examples. Therefore, please
refer to the individual camera manual.
19
ķ