Owner's manual

Components
Leica Angle Two
™
User Manual Rev A02 © Leica Biosystems Richmond Inc. 2010 17
Tilt
The primary tilt plane can be in either the AP or ML directions (see Figure 15). Always remember to
update the software with the primary tilt direction (“Tilt Direction” on page 29).
To adjust the tilt loosen the tilt clamp and move the manipulator to the desired angle, then
retighten the clamp. A scale below the clamp shows the amount of tilt.
Figure 15. Tilt movement in the AP (left) and ML (right) directions
Changing From AP to ML Tilt
1. Unlock the swing-out clamp and swivel the manipulator 90° so the probe faces the front of the
instrument (see Swing-Out).
Figure 16. The manipulator swung-out to the front of the instrument
Swing-out clamp
Rotation clamp
Tilt encoder