User Manual

Loading & saving data, and creating CDs
218
Other disk operations
Setting the date and time
KRONOS has an internal calendar, which is used to record
the date and time when you save data. You can set the date
and time by using the Disk Utility page’s Set Date/Time
menu command.
You will need make these settings after you purchase the
KRONOS, and after replacing the calendar backup battery.
1. Press the DISK button to enter Disk mode.
2. Select the Disk–Utility page. Press the File tab, and
then the Utility tab.
3. Open the page menu, and select the Set Date/Time
command.
The following dialog box will appear.
4. Use the VALUE controllers to set the correct year,
month, day, hour, minute, and second.
5. Press the OK button.
If the calendar backup battery runs low, the following
message will appear in the LCD screen:
“The clock battery voltage is low. Please replace the
battery, and set the date and time in Disk mode”
If the calendar backup battery runs down completely, the
calendar will be initialized, and the date and time will not
be recorded correctly. Your Korg Distributor can help you
find a service center to replace the battery.