Installation Guide

2 TT-1628 3/14
Use OnCue to Update the Controller
Firmware
1. Visit this web page to download the controller
firmware and KohlerOnCue.zip for your Windows
laptop computer:
http://www.kohlerpower.com/residential/solutions/oncue.htm
SeeFigure2.
If the generator is already connected to the Internet
for remote monitoring, no changes are needed to
the Internet connection. If the generator is not
already connected to the Internet, click on
Download Instructions Now and follow the
instructions in the Installation Instructions (RDC
only) and the OnCue Plus Manual to connect the
generator to the Internet.
2. Click on Install OnCue Software and Firmware.
See Figure 2. When the dialog box appears, click
on Open. The list of files shown in Figure 3
appears.
1
#
1. Click here to download controller firmware and OnCue software.
Figure 2 Web Page for Controller Firmware and OnCue Software