Instruction Manual (Europe)

ENGLISH

Data Size: B6L (182 mm x 128 mm)

Book Size: B6L (182 mm x 128 mm)

Display Settings

Zone identification for brightness settings

1 Press and hold .

2 Turn the volume knob to select an item (see the following table), then

press the knob.

3 Repeat step 2 until the desired item is selected/activated or follow the

instructions stated on the selected item.

4 Press to exit.

To return to the previous setting item, press

Default: [XX]

[DISPLAY]

[DIMMER]

Dims the illumination.

[OFF]: Dimmer is turned off. Brightness changes to [DAY] setting.

[ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting.

(See the following “[BRIGHTNESS]” settings.)

[DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer.

Turn the volume knob to adjust the [ON] time, then press the knob.

Turn the volume knob to adjust the [OFF] time, then press the knob.

(Default: [ON]: [18:00] ; [OFF]: [6:00])

[DIMMER AUTO]: Dimmer turns on and off automatically when you turn off

or on the car headlights.*1

[BRIGHTNESS] Sets the brightness for day and night separately.

[DAY]/[NIGHT]: Select day or night.

Select a zone. (See the illustration on the left column.)

[LEVEL00] to [LEVEL31]: Set the brightness level.

[TEXT SCROLL]*2

[SCROLL ONCE]: Scrolls the display information once. ;

[SCROLL AUTO]: Repeats scrolling at 5-second intervals. ;

[SCROLL OFF]: Cancels.

*1 The illumination control wire connection is required. (Page 31)

*2 Some characters or symbols will not be shown correctly (or will be blank).

KD_T822BT_E_B5A-3833-00_EN_4th Draft.indd 24KD_T822BT_E_B5A-3833-00_EN_4th Draft.indd 24 6/7/2021 12:00:51 AM6/7/2021 12:00:51 AM