INSTRUCTIONS

Connecting Wired Remote
Control
You can operate the functions of this unit with a
wired remote control.
Memo :
0
When the switches of the camera recorder and
remote control unit are operated at the same
time, the switch operation of the remote control
unit takes priority over that of the camera
recorder.
1
Connect a wired remote control to the
camera recorder.
Connect the wired remote control (sold
separately) to the [REMOTE2] terminal of this
camera recorder.
.
Connect the wired
remote control
Caution :
0
Turn off
the power of the camera recorder when
connecting a wired remote control.
2
Turn on the power of the camera recorder.
Connecting a Remote
Control Unit
The switch
functions of the camera recorder can be
configured using the remote control unit.
* Remote control units supported: RM-LP25U,
RM-LP55U, RM-LP20G
1
Connect the remote control unit to the
camera recorder.
Connect the remote cable of the remote control
unit to the [REMOTE1] terminal located at the
terminal section of this camera recorder.
.
RM-LP25U
Caution :
0
Turn off
the power of the camera recorder when
connecting a remote control unit.
2
Turn on the power of the camera recorder.
3
Set the operate switch of the remote control
unit to ON.
Memo :
0
For details on the functions operable from the
remote control unit, please refer to [Functions
Operable from the Remote Control Unit]
(A P 166).
164
Connecting Wired Remote Control
Connecting External Devices