INSTRUCTIONS

Shooting Assist Item
Focus Assist
For setting whether to add color to the contour of
the focused image upon switching the image to
black-and-white.
[Setting Values: On, ROff]
9
Type
For specifying the operation when the [F.ASSIST/
4] button is pressed.
(
A P55 [Focus Assist Function] )
0
ACCU-Focus:
Enables the Focus Assist and ACCU-Focus
(forced
focus)
functions. The depth of field of the
object becomes shallower to enable easier
focusing. The ACCU-Focus function switches
automatically to “Off” after about 10 seconds.
0
Normal:
Enables only the Focus Assist function. The
focused area is displayed in color to enable
easier focusing. Display color can be specified
with [Color].
[Setting Values: ACCU-Focus, RNormal]
9
Color
For setting the display color of the focused area
when Focus Assist is activated.
[Setting Values: RBlue, Green, Red]
Zebra
For selecting
whether the number of zebra patterns
to display at the bright areas of the subject.
0
2Patterns:
Displays two types of zebra patterns (Zebra1
and Zebra2).
0
1Pattern:
Displays one type of zebra pattern (Zebra1).
[Setting Values: 2Patterns, R1Pattern]
9
Top 1
For setting the maximum brightness level for
displaying the Zebra 1 pattern.
[Setting Values: Over, 100% to 5% (in 5%
increments)] (R80%)
9
Bottom 1
For setting the minimum brightness level for
displaying the Zebra1 pattern.
[Setting Values: 100% to 0% (in 5% increments)]
(R70%)
9
Top 2
For setting the maximum brightness level for
displaying the Zebra 2 pattern.
[Setting Values: Over, 100% to 5% (in 5%
increments)] (ROver)
Memo :
0
This item
cannot be selected when [Zebra] is set
to “1Pattern”.
9
Bottom 2
For setting the minimum brightness level for
displaying the Zebra 2 pattern.
[Setting Values: 100% to 0% (in 5% increments)]
(R80%)
Memo :
0
This item
cannot be selected when [Zebra] is set
to “1Pattern”.
Peaking Frequency
For setting the frequency bandwidth for
emphasizing the outline using the [VF PEAKING]
adjustment knob or [LCD PEAKING +/-] button.
[Setting Values:
RHigh, Middle, Low]
Marker Settings Item
For setting the marker and safety zone, which are
useful in helping you determine the angle of view
for the image according to the shooting purpose.
(A P154 [Marker and Safety Zone Displays] )
Memo :
0
During Clip
Review or when in the Media mode,
the markers do not appear regardless of the
setting.
Marker Settings
For setting whether to display the marker, safety
zone, and center marks on the screen.
[Setting Values: On, ROff]
9
Grid Marker
For setting whether to display a 3x3 grid on the
screen.
[Setting Values: On, ROff]
Memo :
0
When [Grid Marker] is set to “On”, [Aspect
Ratio], [Aspect Marker], and [Safety Zone] do
not function.
LCD/VF Menu
121
Menu Display and Detailed Settings