User's Manual

157
5 Specify a display period in seconds
6 Click [OK]
Note:
● The green frame indicates that the area in the frame is set
for the carousel feature.
䡵 Changing the Camera While the Carousel
Function is Active
On the live images screen, the following operation icons will
be displayed if you place the cursor in the bar of the camera
window set for the carousel function.
This section describes procedures to display a camera
selected in the view in the hotspot area. You can view an
enlarged view by setting a display area larger than the
others, i.e. [1] in the [1 + 7] layout, as a hotspot.
1 Click the [Setup] tab
2 Click [Hotspot] in the [System Overview] section
and drag to a preferred position in the view
3 Release the mouse button at a preferred
position
Item Description
A Default carousel
time
For specifying units of seconds
common to multiple cameras, if
applicable.
B Time for
selected camera
For specifying a display period for
cameras selected in the list in
seconds. Select the [Default] check
box to set the units of time set in
[Default carousel time].
C Move Up/
Move Down
For changing the order of the
selected cameras.
Item Description
Change the camera in the order
set for the carousel function.
Pause playback.
Enlarging Images of a
Selected Camera (Hotspot)