SNA Link/iX Node Managers Guide (30291-90507)

34 Chapter2
SNA Node and Link Configuration
Data Required from the Host Configuration
Data Required from the Host Configuration
Data in an SNA node configuration file must correspond to information
from the host configuration. So, before using NMMGR, you should have
certain information from the host configuration.
The host information that corresponds to SNA node configuration
information for SNA/SDLC links, SNA/X.25 links, and SNA/Token Ring
links is described below.
SNA/SDLCMUX Information
For the host and the HP e3000 to communicate, you must coordinate
the SNA/SDLCMUX node configuration with the ACF/NCP and
ACF/VTAM host configurations. The HP SNA Products Remote System
Configuration Guide explains these configurations. Table 2-1 shows the
relationships between items from the host configuration and items in
the SNA node configuration file for an SNA/SDLCMUX link. Each
NMMGR screen field is described later in this chapter.
SNA/X.25 Information
For the host and the HP e3000 to communicate, you must coordinate
the SNA/X.25 node configuration with the host configuration. The HP
SNA Products Remote System Configuration Guide explains this
configuration.
Table 2-2 shows the relationships between items from the host
configuration and items in the SNA node configuration file for
Table 2-1 Host ACF/NCP and ACF/VTAM Values for SDLCMUX
Host Configuration
Macro and Operand
Field in NMMGR Screen NMMGR Screen
LINE SPEED Speed Link Data
PU PUNAME SNA Node Name Configuration
ADDR Station ID Link Data
IDBLK ID BLK PU Data
IDNUM ID NUM PU Data
MAXDATA MAX DATA PU Data
PUTYPE Node Type PU Data
LU LUNAME LU Name LU Data
LOCADDR LU# LU Data