MPE/iX Intrinsics Reference Manual (32650-90905)

456 Chapter8
Command Definitions (HPMERGEEND-LOGSTATUS)
HPVOLINFO
-151 Missing itemnum or item (not paired).
-152 Required parameter omitted.
-153 Parameter address out of bounds.
-154 Split stack calls not allowed.
-155 LDEV, volume set/class, volume not mounted.
-156 Invalid volume specifier number.
-157 Invalid volume specifier.
-158 LDEV not a disk LDEV.
-159 Device class not configured for volumes.
-160 Device class does not map into a volume class.
-161 Free space range sizes not in ascending order.
-162 Invalid number of free space ranges specified.
-163 Volume class cannot be specified with system set.
-164 Error while scanning the directory.
-165 Volume label is unreadable.
-166 Disk free space map is bad.
-167 Allocation is disabled for disk free map.
-168 Defective tracks table is unreadable.
-169 Disk I/O error.
-170 Virtual memory is only valid on system volumes.
-171 Directory size is not valid for specified volume.
-172 Spoolfiles are valid only on system volumes.
-173 Item number is valid only on MPE/iX systems.
-174 Item number is valid only on MPE V systems.
-175 List length specified is invalid.
-176 Item number / volume specifier number combination is
illegal.
-177 Item is not yet implemented.
-178 Volume table is in an inconsistent state.
-179 Unrecognized drive type.
-180* Physical I/O error.
-181* An unexpected error was detected. Check the error stack
to determine the exact error.
-182* An error was detected in the label management
subsystem. Check the error stack to determine the exact