MPE/iX Commands Reference Manual (32650-90877)

Chapter 8 307
Command List VI
Commands LISTFILE thru =LOGON
shown in two groups, input spool files to the left of the display and
output spool files to the right. Of these, only SELECTED is not a state.
Instead, SELECTED shows the total count of spool files whose output
priority is higher than the global outfence; that is, SELECTED displays
the sum of printing files plus those READY files whose output priority is
above the global outfence.
• The total number of input spool files, the sector count for input spool
files, the total number of output spool files, and the sector count for
output spool files.
• The global outfence and any device-specific outfences.
Use
This command may be issued from a session, job, a program, or in BREAK. It is breakable.
Only files to which the user has access are displayed.
Examples
Following are some examples of the displays produced by LISTSPF. The first and third
examples display all output spool files for the current user.account not using the console.
The second example displays all spool files for the current user.account not using the
console.
LISTSPF
SPOOLID JOBNUM FILEDES PRI COPIES DEV STATE RSPFN OWNER
#0123 J12 SP 13 2 PP PRINT F DEV.HPE
#0124 S14 LIST 9 1 00000012 READY F DEV.HPE
#0128 J144 $STDLIST 8 1 EPOC READY DEV.HPE
#01233 S1234 OUTLIST 0 1 FASTLP DEFER DEV.HPE
INPUT SPOOL FILES OUTPUT SPOOL FILES
ACTIVE = 0; CREATE = 0; READY = 2;
OPEN = 0; DEFER = 1; SELECTED = 3;
READY = 0; DELPND = 0; SPSAVE = 0;
PRINT = 1; XFER = 0;
PROBLM = 0;
TOTAL IN FILES = 0; TOTAL OUTFILES = 4;
IN SECTORS = 0; OUT SECTORS = 5964;
OUTFENCE = 6
:LISTSPF @;DETAIL
SPOOLID JOBNUM FILEDES PRI COPIES DEV STATE RSPFN OWNER
FORMID JOBNAME COPSRM SECTS RECS PAGES DATE TIME
#O123 J12 SP 13 2 PP PRINT F DEV.HPE
TESTJOB 1 250 500 125 07/09/88 8:39
#O124 S14 LIST 9 1 00000012 READY F DEV.HPE
PAYCHECK TESTJOB 1 250 500 ~9 12/20/88 8:39