Manualshelf

Owners manual

ManualsBrandsHP ManualsComputers & LaptopsProLiant DL380 G10 2U Rack Server - 2 x Intel Xeon Gold 6130 Hexadeca-core (16 Core) 2.10 GHz - 64 GB Installed DDR4 SDRAM -
111112113114115116117118119120
Hardware options installation 111
8.
Route the cable through the opening in the front of the server, and then install the SID power switch
module. Secure the module using the existing screw.
9. Connect the SID module cable to the system board power switch module connector.
10. Install the fan cage.
11. Install the air baffle (on page 33).
12. Install the access panel (on page 28).
13. Slide the server into the rack.
14. Connect each power cord to the server.
15. Connect each power cord to the power source.
16. Power up the server ("Powering up the server" on page 26).