Operation Manual

HEIDENHAIN CNC PILOT 640 555
8.2 Parameters
... / Min. transv. finishing depth (FMPL) [mm] (602319) Value for determination of the machining operation:
 Without inside contour: Always with transverse cut
 With inside contour, FMPL >= l1: Without
transverse cut
 With inside contour, FMPL < l1: With transverse cut
... / Max. finishing cutting depth (FMST) [mm] (602320) Permissible infeed depth for non-machined undercuts
 FMST > ft: With undercut machining
 FMST <= ft: Without undercut machining
... / No. rev. for chamfer/rounding (FMUR) (602321) Minimum number of revolutions; feed rate is reduced
automatically.
... / Recessing (602400) / ...
... / Approach/external recessing (ANESA) (602401) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Approach/internal recessing (ANESI) (602402) Approach strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Departure/external recessing (ABESA) (602403) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
... / Departure/internal recessing (ABESI) (602404) Departure strategy:
 1: Move simultaneously in X and Z directions
 2: First X, then Z direction
 3: First Z, then X direction
 6: Coupled motion; X precedes Z direction
 7: Coupled motion; Z precedes X direction
Parameters: Processing / ... Meaning